: Say John, I have one of those old Craftsman table saws, all cast-iron, etc.
: with the little brass adjustable exact-i-cut guides, the whole shebang.

: My saw is woefully out of tune, but I can't get enough rotation out of the
: blade mounting stock to make the blade perfectly parallel to the miter
: slots. I probably need to disassemble everything and see if I can machine
: in some more adjustment.

: One of the guides on my blade lift/lower rod is broken...do you have any idea
: if Sears still has replacement parts or service on these older saws?

You now I don't but let me look and see if I still have my parts book with mine. Some things I save forever. The only things I have replace on mine is the motor, and a few belts. It been a good on.

John

: thanks,

: Shawn