I'm glassing the outside of the hull of my kayak this weekend and will be doing the deck shortly there after. My question is how much do I have to round over the edge where the deck and hull meet, so that I can run the 4oz glass across the deck around the 90 degree edge at the sheer and 2" or so down to overlap the deck.
I have run a strip of light colored veneer just below the sheer and the more I round over the sheer the more of the edge of the okoume ply I expose above the veneer, so I don't want to round over more than I have to, but I don't want the glass to pull away at the edge either.
How much is enough?

Thanks,

Ken