Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Skegs and water flow.
By:David Walker
Date: 7/8/1998, 6:42 pm
In Response To: Re: Skegs and water flow. (Mark Kanzler)

> I'd put the fin on the centerline, angled about 6 degrees, near
> the stern of the boat (probably at the farthest aft place where the
> center of the boat is submerged).

> Keep it small (anywhere from 3/4 wide by 2 tall to 2 wide by
> 3 tall) and thin (.030 - .060 Aluminum, brass or stainless steel)
> with rounded edges and no sharp corners. I'll try to get you a picture
> tonight again.

> I'd put the fin on the centerline, angled about 6 degrees, near
> the stern of the boat (probably at the farthest aft place where the
> center of the boat is submerged).

> Keep it small (anywhere from 3/4 wide by 2 tall to 2 wide by
> 3 tall) and thin (.030 - .060 Aluminum, brass or stainless steel)
> with rounded edges and no sharp corners. I'll try to get you a picture
> tonight again.

Perhaps this is in picture you are posting, but if not, how would you recommend attaching it to boat. Also, where does one go to buy metal sheets. And last, what kind of tool do you use to make a nice clean, nonjagged cut.

Dave

Messages In This Thread

Mayday Mayday! boat goes left
David Walker -- 7/6/1998, 9:17 pm
Re: Try another paddler
Jay Babina -- 7/7/1998, 2:32 pm
Re: Mayday Mayday! boat goes left
Mark Kanzler -- 7/7/1998, 11:51 am
Re: rudders
NPenney -- 7/8/1998, 8:17 am
Re: Aspect ratio.
Mark Kanzler -- 7/8/1998, 11:21 am
Re: Aspect ratio.
NPenney -- 7/8/1998, 2:34 pm
Re: Aspect ratio.
Nick Schade -- 7/8/1998, 3:17 pm
Re: Higher Aspect ratio = No Steering
NPenney -- 7/9/1998, 7:49 am
Re: Higher Aspect ratio = No Steering
Mark Kanzler -- 7/9/1998, 10:38 am
Re: Higher Aspect ratio = No Steering
NPenney -- 7/9/1998, 11:50 am
Re: Old Textbooks, etc.
Mark Kanzler -- 7/11/1998, 12:52 am
Re: Old Textbooks, etc.
NPenney -- 7/10/1998, 2:53 pm
Re: Here's a sketch of one possible solution (as described in prev post)
Mark Kanzler -- 7/8/1998, 12:41 am
Image link still not working.
Mike Spence -- 7/7/1998, 1:28 pm
Re: Image link still not working. (Sorry)
Mark Kanzler -- 7/7/1998, 1:56 pm
Re: Image working.(?)
Mark Kanzler -- 7/8/1998, 1:26 am
Not yet. - Don't despair!
Mike Spence -- 7/8/1998, 1:19 pm
Re: Not yet. - Don't despair!
Mark Kanzler -- 7/8/1998, 2:18 pm
Re: Here it is! (Satisfaction Guaranteed)
Mark Kanzler -- 7/8/1998, 10:23 pm
Re: Here it is! (Satisfaction Guaranteed)
David Walker -- 7/10/1998, 10:28 am
Re: Surfbard skegs.
Mark Kanzler -- 7/10/1998, 11:58 am
Re: Surfbard skegs.
David Walker -- 7/10/1998, 1:49 pm
Re: Surfbard skegs.
David Walker -- 7/10/1998, 5:30 pm
Re: Surfbard skegs.
Mark Kanzler -- 7/12/1998, 11:08 am
Re: Surfbard skegs.
Paul Jacobson -- 7/12/1998, 7:18 pm
Re: Surfbard skegs site (try it again please).
Mark Kanzler -- 7/10/1998, 2:50 pm
Re: Surfbard skegs site (try it again please).
Mike Spence -- 7/10/1998, 6:51 pm
Re: Here it is! (Satisfaction Guaranteed)
Nick Schade -- 7/9/1998, 4:12 pm
Re: Here it is! (Satisfaction Guaranteed)
Mark Kanzler -- 7/11/1998, 12:37 am
Re: Mayday Mayday! boat goes left
Mark Kanzler -- 7/8/1998, 12:39 am
My $0.02
CHad -- 7/7/1998, 11:29 am
P.S.
CHad -- 7/7/1998, 11:56 am
Re: P.S.
Guy Wright -- 7/7/1998, 1:46 pm
Me Too!
Shawn Baker -- 7/8/1998, 11:01 am
Re: Mayday Mayday! boat goes left
NPenney -- 7/7/1998, 7:33 am
how I solved mine.
R. N. Sabolevsky -- 7/6/1998, 11:56 pm
Re: Mayday Mayday! boat goes left
Duane Strosaker -- 7/6/1998, 11:38 pm
Re: Mayday Mayday! boat goes left
Mike Spence -- 7/7/1998, 12:11 pm
Re: Mayday Mayday! boat goes left
Paul Jacobson -- 7/6/1998, 11:20 pm
Off center fins and water flow
David Walker -- 7/8/1998, 5:28 pm
Re: Off center fins and water flow
NPenney -- 7/9/1998, 11:57 am
Re: Off center fins and water flow
Mike Spence -- 7/9/1998, 5:56 pm
Re: Off center fins and water flow
Paul Jacobson -- 7/11/1998, 2:53 am
Re: Off center fins and water flow
Mark Kanzler -- 7/10/1998, 11:47 am
Re: Off center fins and water flow
NPenney -- 7/10/1998, 6:22 am
Re: Skegs and water flow.
Mark Kanzler -- 7/8/1998, 6:10 pm
Re: Skegs and water flow.
David Walker -- 7/8/1998, 6:42 pm
Re: Skegs and water flow.
Mark Kanzler -- 7/8/1998, 7:07 pm
Re: Skegs and water flow.
David Walker -- 7/10/1998, 10:37 am
Re: Skeg attachment w/ silicone.
Mark Kanzler -- 7/10/1998, 11:34 am
Re: Mayday Mayday! boat goes left
Wes Boyd -- 7/6/1998, 10:36 pm