Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Cove and Bead bits
By:Fenton Sue
Date: 10/8/2001, 6:38 am
In Response To: Cove and Bead bits (Fenton Sue)

I may have miscalculated....I was figuring 120 strips for a single boat. If I had to make two passes to form the bead I would have to make a third pass on the same strip to form the cove.

I am still trying to decide if I want to use the b & c method. I have read about planing instead. I also appreciate the input from those of you who have built boats before.

Thanks again to all!

Messages In This Thread

Cove and Bead bits
Fenton Sue -- 10/5/2001, 8:28 pm
Re: Cove and Bead bits
Rick M -- 10/12/2001, 8:29 pm
Re: Cove and Bead bits
Fenton Sue -- 10/8/2001, 6:40 am
Re: Cove and Bead bits
Fenton Sue -- 10/8/2001, 6:38 am
Re: Cove and Bead bits
Paul G. Jacobson -- 10/8/2001, 12:39 am
Re: Cove and Bead bits
Brian Wegener -- 10/7/2001, 1:21 pm
Re: Cove and Bead bits
steve hartmann -- 10/6/2001, 12:38 pm
Re: Cove and Bead bits
daren neufeld -- 10/6/2001, 12:47 am
Re: Cove and Bead bits
Tom-Atlanta -- 10/5/2001, 11:26 pm
Re: Cove and Bead bits
John Schroeder -- 10/6/2001, 11:33 pm