Re: veneer inlays
By:Shawn Baker
Date: 8/7/1998, 11:56 am
Date: 8/7/1998, 11:56 am
In Response To: veneer inlays (Jan Brandt)
> I found very thin veneer in 12x24" sections at the local LOwe's
> hardware store. It is paper backed. My question is: will it work when
> glued on to the deck with epoxy and covered with nothing else but
> a couple of further coats of epoxy?
I used the paper-backed veneer to make an emblem on the deck of my boat. I found that you can't sand very far into the veneer without exposing the paper. Make sure you cover the deck all around the veneer to raise the deck to the height of the veneer
Messages In This Thread
- veneer inlays
Jan Brandt -- 7/30/1998, 11:45 pm- Re: veneer inlays
Shawn Baker -- 8/7/1998, 11:56 am- Re: veneer inlays
Nick Schade -- 8/3/1998, 3:10 pm- Re: veneer inlays
AL BRATTON -- 8/1/1998, 10:06 pm- Re: veneer inlays
Paul Stomski -- 7/31/1998, 4:43 pm- Re: veneer inlays
Wesley Gross -- 8/1/1998, 12:52 am- Here's the link
Mike Spence -- 7/31/1998, 1:34 pm
- Re: veneer inlays
Jay Babina -- 7/31/1998, 11:43 am- Re: Constantines (Veneer Supplier)
Mark Kanzler -- 8/3/1998, 7:03 pm
- Re: veneer inlays
Zax -- 7/31/1998, 11:29 am- Re: veneer inlays
Mark Kanzler -- 7/31/1998, 10:29 am - Re: veneer inlays
- Re: veneer inlays