Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

sheer clamp installation help
By:chris j
Date: 8/17/1998, 11:27 am

Thanks to all those who answered my post on the scarf failure,I am convinced that I should just be more careful next time due to the fact that the plywood broke and not the scarf joint.

My next problem involves the sheer clamp installation. The instructions in the plans are not so clear,they say to" glue the sheer clamp in position."does this mean with epoxy,I think so, but should I thicken the epoxy with cotton fibre as with the scarf joints.Should I use anything else(screws or nails). thanks again.

Messages In This Thread

sheer clamp installation help
chris j -- 8/17/1998, 11:27 am
Re: time vs money
Timothy - Toronto, Ontario -- 8/19/1998, 1:24 pm
Re: time vs money
Mark Kanzler -- 8/19/1998, 4:38 pm
Cheap shear clamp clamps
Jay Babina -- 8/18/1998, 5:07 pm
Re: sheer clamp installation help
Rich Kuchar -- 8/18/1998, 2:31 pm
I set mine flush with the top
Brian C. -- 8/18/1998, 3:55 pm
Re: I set mine flush with the top
Mike Scarborough -- 8/18/1998, 6:14 pm
Inside edge?
Brian C. -- 8/19/1998, 10:50 am
Re: Inside edge?
Mark Bodnar -- 8/22/1998, 8:04 pm
Re: sheer clamp installation help
Scotty -- 8/18/1998, 2:00 am
I made clamps from scrap
PJacobson -- 8/17/1998, 9:45 pm
Re: I made clamps from scrap
Mark Kanzler -- 8/18/1998, 5:37 pm
Re: cheaper yet
NPenney -- 8/18/1998, 11:45 am
Re: cheaper yet
Mark Kanzler -- 8/19/1998, 12:54 am
Re: I made clamps from scrap
Mark Kanzler -- 8/18/1998, 11:10 am
Re: sheer clamp installation help
Don Beale -- 8/17/1998, 8:04 pm
Re: sheer clamp installation help
Timothy - Toronto, Ontario -- 8/17/1998, 1:50 pm
Re: sheer clamp installation help
Shawn Baker -- 8/17/1998, 4:16 pm
Re: sheer clamp installation help
Bobby Curtis -- 8/21/1998, 9:38 pm
Re: sheer clamp installation help
Mark Kanzler -- 8/17/1998, 4:35 pm
Be Carful, don't get bit
Brian C. -- 8/18/1998, 1:04 pm
Re: Be Carful, don't get bit
Paul A. Lambert -- 8/21/1998, 8:44 am
Re: Be Carful, don't get bit
jim champoux -- 8/18/1998, 1:29 pm
Re: war wounds
Ross Leidy -- 8/18/1998, 3:23 pm
Re: war wounds
jim champoux -- 8/19/1998, 1:51 pm
Re: war wounds
Ross Leidy -- 8/19/1998, 2:12 pm
Re: war wounds
Mark Kanzler -- 8/19/1998, 4:50 pm
Re: war wounds
Ross Leidy -- 8/19/1998, 5:01 pm
Re: war wounds
Mark Kanzler -- 8/19/1998, 5:13 pm
Re: war wounds
jim champoux -- 8/18/1998, 3:34 pm
WHEW!
Bruce H. -- 8/18/1998, 9:09 pm
Re: WHEW!
Mark Kanzler -- 8/19/1998, 11:20 am
Re: war wounds
npenney@erols.com -- 8/18/1998, 6:56 pm
Re: Tasteless.
Mark Kanzler -- 8/18/1998, 5:30 pm
They did great Mark.
Mike -- 8/19/1998, 12:38 pm
Re: They did great Mark.
Mark Kanzler -- 8/19/1998, 11:05 am
Pardon me - but what the F*CK
Brian C. -- 8/18/1998, 3:49 pm
Re: Profane vulgar over-reactions.
npenney@erols.com -- 8/18/1998, 6:55 pm
apologize for profanity, but I still stand on the isssue
Brian C. -- 8/19/1998, 11:11 am
Re: Profane vulgar over-reactions.
Mark Kanzler -- 8/18/1998, 7:24 pm
Shock Value
Paul Lund -- 8/19/1998, 7:04 am
Re: Pardon me - but what the F*CK
jim champoux -- 8/18/1998, 4:04 pm
seek help
Brian C. -- 8/18/1998, 4:11 pm
Re: Pardon me...
Don Beale -- 8/18/1998, 3:54 pm
Trying to _avoid_ accidents here not celebrate
Brian C. -- 8/18/1998, 4:01 pm
Amazing engineering Brian, lighten up.
Mike -- 8/19/1998, 12:27 pm
Re: Amazing engineering Brian, lighten up.
Mark Kanzler -- 8/20/1998, 12:07 am
Amazing engineering Brian - Thanks :)
Brian C -- 8/19/1998, 11:15 am
Re: Amazing Brian - We'll get yer raise...
Mark Kanzler -- 8/20/1998, 12:12 am
that's OK just send me the money
Brian C. -- 8/20/1998, 12:52 am
Re: that's OK just send me the money
Mark Kanzler -- 8/19/1998, 5:03 pm
Re: Amazing engineering Brian, lighten up.
Paul Lund -- 8/19/1998, 6:36 am
Re: Thumb Mis-take
Don Beale -- 8/19/1998, 1:01 pm
Re: Thumb Mis-take
Ross Leidy -- 8/19/1998, 1:22 pm
YEEOWW!
Mike Spence -- 8/19/1998, 1:12 pm
Re: YEEOWW!
Mark Kanzler -- 8/19/1998, 4:58 pm
Re: war wounds
Ross Leidy -- 8/18/1998, 3:44 pm
Re: sheer clamp installation help
NPenney -- 8/18/1998, 11:42 am
Re: sheer clamp installation help
Mark Kanzler -- 8/19/1998, 12:50 am
Re: sheer clamp installation help
Shawn Baker -- 8/18/1998, 10:07 am
Re: sheer clamp installation help
Timothy - Toronto, Ontario -- 8/18/1998, 9:06 am
Re: sheer clamp installation help
Mark Bodnar -- 8/17/1998, 8:33 pm