Here are a couple of source that carry okoume plywood in various thicknesses that are measured metrically (not that that is important particularly). The one that I have used is Island Imports in Duncan B.C.. They have been most helpful and would ship it to you. Yes, it is too far! I live in the center of the country and so most suppliers are too far! The second source is Windsor Plywood but they are much more expensive. I know there must be others out your way. Good Luck.

> Tim - have you found a good Canadian source for Oakumn plywood?
> I used Luan on my Yare, which was Ok, but I'd like to build a Cape
> Charles next? While you're at it, if you have a good source for epoxy
> that would be appreciated. Thanks!