Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Ontario Source - Quarter Cut Lumber
By:Timothy - Toronto, Ontario
Date: 8/20/1998, 8:45 am
In Response To: Re: Ontario Source - Quarter Cut Lumber (fbayer)

Thanks, I'll have to try that. I was looking at 2" x4"s, then 4" x 4"s, then 6" x 6"s, with no luck. Quarter cut boards used to be mixed in with the rest, but since computerized cutting it seems lumber of those dimensions is cut from the dead centre of the tree. It didn't occur to me to take the edges from a 2" x 10" or 2" x 12".

Thanks again.

Messages In This Thread

Ontario Source - Quarter Cut Lumber
Timothy - Toronto, Ontario -- 8/19/1998, 9:11 am
Re: Ontario Source - Quarter Cut Lumber
fbayer -- 8/19/1998, 5:43 pm
Re: Ontario Source - Quarter Cut Lumber
Timothy - Toronto, Ontario -- 8/20/1998, 8:45 am