Date: 9/12/1998, 4:45 pm
I was the one that provided the Halifax sources for Okoume (I assume that your not looking for strips). 2 locations in Halifax. Warning, the sheets are pretty floppy - as a result (if you don't have a flat bed truck) you'll need some kind of supports (2x4's?) along the full length of the plywood if you're going to carry it for a 15hr drive on the Hwy.
Piercys - 2854 Robie St #454-6411 (cost ~$45 per sheet),
Leckie's - 7037 Mumford Rd #454-8391 (should match Piercys price)
Hope this helps, Mark Bodnar
> Sometime around February/March there was a request here for a Canadian
> source of okoume, then later someone, maybe Timothy in Toronto, also made
> a request for a Canadian source. I remember one of the postings listed a
> place in Eastern Canada (maybe Halifax) and somewhere in the Toronto area.
> I live about 1.5 hours south of Ottawa, 3 hours east of Toronto, and 15 or
> so hours from Halifax. I would appreciate someone pointing me to any of
> these sources if you know them, even Halifax as I will be in that area in
> about two weeks. I am also looking for a similar source of strips. I have
> seen the name Noah's mentioned, but do not know where (or what) it is.
> Thanks in advance.
Messages In This Thread
- Canadian Wood Source
John Waddington -- 9/10/1998, 8:16 am- Re: Other sources
Timothy - Toronto, Ontario -- 9/28/1998, 8:52 am- All Sorts of Neat Hardware & Supplies Source
Mark Kanzler -- 9/27/1998, 10:45 am- Re: Noahs Marine: Canadian Wood Source?
Mark Kanzler -- 9/27/1998, 10:38 am- okoume marine ply
Yan Stambouli -- 9/26/1998, 9:16 am- Re: Canadian Wood Source
Yan Stambouli -- 9/13/1998, 8:43 pm- Wood types
Timothy - Toronto, Ontario -- 9/15/1998, 12:51 am- CSA Test Spec.
Yan Stambouli -- 9/26/1998, 8:55 am
- CSA Test Spec.
- Re: Canadian Wood Source
Mark Bodnar -- 9/12/1998, 4:45 pm- Re: Canadian Wood Source
Jim Reid -- 9/11/1998, 6:43 am- Re: Canadian Wood Source
Matthew Bastian -- 9/10/1998, 8:51 am - All Sorts of Neat Hardware & Supplies Source
- Re: Other sources