Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Attempts at a seat mold
By:Don Beale
Date: 9/28/1998, 11:33 am
In Response To: Attempts at a seat mold (Ross Leidy)

So the bottom is unhappy with the seat. Too bad, I was going to try those. I have a plastic chair, off the top of a bar stool or maybe one of the commercial boat seats. Wouldn't it be easier to modify the plastic seat (cut the back shorter) and mount it to the boat?

Messages In This Thread

Attempts at a seat mold
Ross Leidy -- 9/28/1998, 10:27 am
Yugo seat ;)
Brian C. -- 9/30/1998, 10:06 am
Re: Yugo seat ;)
Mark Kanzler -- 9/30/1998, 11:27 am
Caddillac seat
Brian C. -- 9/29/1998, 4:35 pm
Re: Caddillac seat
paul lund -- 9/29/1998, 7:00 pm
Could be the Barcalounger seat ;->
Ross Leidy -- 9/29/1998, 4:51 pm
AAAaahhh, but...
Rick C. -- 9/29/1998, 11:27 pm
Re: Attempts at a seat mold
Ross Leidy -- 9/29/1998, 9:22 am
Re: Attempts at a seat mold
David Dick -- 9/28/1998, 5:12 pm
Re: Attempts at a seat mold
Mark Kanzler -- 9/29/1998, 12:50 am
Re: Attempts at a seat mold
jim champoux -- 9/28/1998, 1:52 pm
Re: Attempts at a seat mold
Mark Kanzler -- 9/28/1998, 2:08 pm
Kerf-Bent Plywood Seat
William Drislane -- 9/29/1998, 12:26 am
Re: Attempts at a seat mold
Don Beale -- 9/28/1998, 11:33 am
Re: Attempts at a seat mold
Ross Leidy -- 9/28/1998, 11:46 am