Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Attempts at a seat mold
By:jim champoux
Date: 9/28/1998, 1:52 pm
In Response To: Re: Attempts at a seat mold (Mark Kanzler)

regarding hose...I tried this (on a different project) and, well I couldnt get it to stay down right. I settled on light cardboard bent into a V (upside down) to make stiffening channels. worked fine.

Messages In This Thread

Attempts at a seat mold
Ross Leidy -- 9/28/1998, 10:27 am
Yugo seat ;)
Brian C. -- 9/30/1998, 10:06 am
Re: Yugo seat ;)
Mark Kanzler -- 9/30/1998, 11:27 am
Caddillac seat
Brian C. -- 9/29/1998, 4:35 pm
Re: Caddillac seat
paul lund -- 9/29/1998, 7:00 pm
Could be the Barcalounger seat ;->
Ross Leidy -- 9/29/1998, 4:51 pm
AAAaahhh, but...
Rick C. -- 9/29/1998, 11:27 pm
Re: Attempts at a seat mold
Ross Leidy -- 9/29/1998, 9:22 am
Re: Attempts at a seat mold
David Dick -- 9/28/1998, 5:12 pm
Re: Attempts at a seat mold
Mark Kanzler -- 9/29/1998, 12:50 am
Re: Attempts at a seat mold
jim champoux -- 9/28/1998, 1:52 pm
Re: Attempts at a seat mold
Mark Kanzler -- 9/28/1998, 2:08 pm
Kerf-Bent Plywood Seat
William Drislane -- 9/29/1998, 12:26 am
Re: Attempts at a seat mold
Don Beale -- 9/28/1998, 11:33 am
Re: Attempts at a seat mold
Ross Leidy -- 9/28/1998, 11:46 am