Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Attempts at a seat mold
By:Mark Kanzler
Date: 9/28/1998, 2:08 pm
In Response To: Re: Attempts at a seat mold (jim champoux)

Just after I posted it I flashed on that idea. I'm glad to hear it works. I was mulling it over to see if anything more clever came to mind. Maybe thick paper would be good. Construction paper could add color, and you could write details about the mold (e.g. date of mfg.) for future reference.

> regarding hose...I tried this (on a different project) and, well I couldnt
> get it to stay down right. I settled on light cardboard bent into a V
> (upside down) to make stiffening channels. worked fine.

Messages In This Thread

Attempts at a seat mold
Ross Leidy -- 9/28/1998, 10:27 am
Yugo seat ;)
Brian C. -- 9/30/1998, 10:06 am
Re: Yugo seat ;)
Mark Kanzler -- 9/30/1998, 11:27 am
Caddillac seat
Brian C. -- 9/29/1998, 4:35 pm
Re: Caddillac seat
paul lund -- 9/29/1998, 7:00 pm
Could be the Barcalounger seat ;->
Ross Leidy -- 9/29/1998, 4:51 pm
AAAaahhh, but...
Rick C. -- 9/29/1998, 11:27 pm
Re: Attempts at a seat mold
Ross Leidy -- 9/29/1998, 9:22 am
Re: Attempts at a seat mold
David Dick -- 9/28/1998, 5:12 pm
Re: Attempts at a seat mold
Mark Kanzler -- 9/29/1998, 12:50 am
Re: Attempts at a seat mold
jim champoux -- 9/28/1998, 1:52 pm
Re: Attempts at a seat mold
Mark Kanzler -- 9/28/1998, 2:08 pm
Kerf-Bent Plywood Seat
William Drislane -- 9/29/1998, 12:26 am
Re: Attempts at a seat mold
Don Beale -- 9/28/1998, 11:33 am
Re: Attempts at a seat mold
Ross Leidy -- 9/28/1998, 11:46 am