Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Cedar strip Kayak
By:Nick Schade
Date: 9/29/1998, 3:25 pm
In Response To: Cedar strip Kayak (David Robins)

I do the vertical part of the coaming before 'glassing. This saves some glassing steps later.

> I Have finished striping, and sanding. I would like some advice now.
> Should I start fiberglassing,? or should I make the coaming first? I am
> constructing the coaming from the cedar strips. Should I reinforse the
> underside of the coaming.? All advice will be greatly appreciated.

> Thank you.

Messages In This Thread

Cedar strip Kayak
David Robins -- 9/29/1998, 1:05 pm
Re: Cedar strip Kayak
Karl Coplan -- 9/30/1998, 1:25 pm
Re: Cedar strip Kayak
Nick Schade -- 9/29/1998, 3:25 pm
Re: Cedar strip Kayak
Nathanael -- 9/29/1998, 2:50 pm
I'm too young?
Matthew Bastian -- 9/30/1998, 10:27 am
Re: I'm too young? (Inexperienced, etc.)
Mark Kanzler -- 9/30/1998, 11:15 am
Re: I'm too young? (Inexperienced, etc.)
Shawn Baker -- 10/1/1998, 6:02 pm
Re: I'm too young? (Inexperienced, etc.)
jim champoux -- 10/5/1998, 11:13 am
Re: Woody
Mark Kanzler -- 10/1/1998, 6:18 pm
Re: I'm too young? (Inexperienced, etc.)
Nick Schade -- 9/30/1998, 1:58 pm
Re: I'm too young? (Inexperienced, etc.)
Roger Tulk -- 9/30/1998, 1:49 pm
Re: IMarl's design project.
Karl Coplan -- 9/30/1998, 1:30 pm
Re: ISS design project.
Mark Kanzler -- 9/30/1998, 1:55 pm
If I was still at the Radar Station ( sorry off topic ... )
Brian C. -- 9/30/1998, 3:22 pm
Re: If I was still at the Radar Station ( sorry off topic ... )
Mark Kanzler -- 9/30/1998, 7:04 pm
Re: If I was still at the Radar Station ( sorry off topic ... )
Brian C. -- 10/1/1998, 10:13 am