Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Length of Ancient paddles vs the Modern counterparts
By:Paul Stomski
Date: 10/2/1998, 8:54 pm
In Response To: Length of Ancient paddles vs the Modern counterparts (Brian C.)

> BTW What can you do to harden the tip? for pushoffs, the occational rock
> ...

What I do is to rought up the edges of the blade, then use tape to create a form of sorts around the blade. I then take thickened epoxy and build a new edge all around the edge of the blade. I build it up about a 1/4 inch all around, or maybe a little thicker and then sand it back to 1/4 inch later. After it cures I file/sand it to a nice fair shape. This is quick and easy to do. Make sure your epoxy mix isn't brittle, and it will wear well. When it comes time to build it up again due to wear and abuse, just repeat the process.

P.

Messages In This Thread

Greenland paddle links
Timothy - Toronto, Ontario -- 10/2/1998, 10:27 am
Length of Ancient paddles vs the Modern counterparts
Brian C. -- 10/2/1998, 11:01 am
I'll build one :)
Brian C. -- 10/5/1998, 6:39 pm
Re: you should
Nick Schade -- 10/6/1998, 2:42 pm
practice for when I get stuck on an Island
Brian C. -- 10/6/1998, 3:01 pm
Re: practice for when I get stuck on an Island
Jerry Weinraub -- 10/6/1998, 7:12 pm
Re: Laminated shaft
Don Beale -- 10/6/1998, 12:46 pm
Re: Laminated shaft
Timothy - Toronto, Ontario -- 10/6/1998, 1:34 pm
is a ferrule worth it on a greenland?
Brian C. -- 10/6/1998, 10:22 am
Re: is a ferrule worth it on a greenland?
Don Beale -- 10/6/1998, 5:36 pm
reinforcing paddle tips
Paul Jacobson -- 10/4/1998, 9:11 pm
Re: Length of Ancient paddles vs the Modern counterparts
Paul Stomski -- 10/2/1998, 8:54 pm
Re: Length of Ancient paddles vs the Modern counterparts
Timothy - Toronto, Ontario -- 10/2/1998, 2:23 pm
Where I got the picture
Brian C. -- 10/2/1998, 4:04 pm
Re: Where I got the picture
Roger Tulk -- 10/5/1998, 12:44 am
Mr. Hitchinson's book has photos
Brian C. -- 10/5/1998, 11:02 am
Re: Mr. Hitchinson's book has photos
Roger Tulk -- 10/7/1998, 12:23 am
I guess we could contact a museum...
Brian C. -- 10/6/1998, 1:51 pm
OK, I did!
Roger Tulk -- 10/12/1998, 9:17 pm
Re: OK, I did!
Mark Kanzler -- 10/14/1998, 3:44 pm
Re: Mr. Hitchinson's book has photos
Mark Kanzler -- 10/5/1998, 11:53 am
Sorry, that's Derek Hutchinson
Brian C. -- 10/6/1998, 12:31 am
Don't know
Brian C. -- 10/6/1998, 12:25 am
Found the book
Brian C. -- 10/6/1998, 12:38 am
Re: Length of Ancient paddles vs the Modern counterparts
Mark Kanzler -- 10/2/1998, 3:10 pm
Re: Length of Ancient paddles vs the Modern counterparts
Nick Schade -- 10/2/1998, 2:12 pm
Mystical Greenland paddle
Jay Babina -- 10/5/1998, 10:10 am
Re: Mystical Greenland paddle
Nick Schade -- 10/5/1998, 6:30 pm
Re: Use what works for you.
Mark Kanzler -- 10/5/1998, 6:59 pm
Re: Use what works for you.
Nick Schade -- 10/6/1998, 2:28 pm
Re: Length of Ancient paddles vs the Modern counterparts
Timothy - Toronto, Ontario -- 10/2/1998, 2:47 pm
Wide vs. Skinny paddle blades
David Dick -- 10/6/1998, 9:14 pm
Re: Length of Ancient paddles vs the Modern counterparts
Nick Schade -- 10/2/1998, 7:53 pm
length vs sprint/endurance
Brian C. -- 10/7/1998, 3:20 pm
Re: Length of Ancient paddles vs the Modern counterparts
Mark Kanzler -- 10/4/1998, 11:15 am
Re: Length of Ancient paddles vs the Modern counterparts
Nolan Penney -- 10/5/1998, 6:37 am
Re: Length of Ancient paddles vs the Modern counterparts
Nick Schade -- 10/6/1998, 6:25 pm
Re: Length of Ancient paddles vs the Modern counterparts
Nolan Penney -- 10/7/1998, 6:53 am
Re: Length of Ancient paddles vs the Modern counterparts
Nick Schade -- 10/7/1998, 2:09 pm
Re: Length of Ancient paddles vs the Modern counterparts
Nolan Penney -- 10/7/1998, 3:21 pm
Re: Paddle flutter
Timothy - Toronto, Ontario -- 10/7/1998, 2:47 pm
Re: Paddle flutter
Nick Schade -- 10/7/1998, 3:49 pm
Re: Length of Ancient paddles vs the Modern counterparts
Mark Kanzler -- 10/8/1998, 12:55 am
Re: Length of Ancient paddles vs the Modern counterparts
Nolan Penney -- 10/7/1998, 3:17 pm
Re: Cadence
Mark Kanzler -- 10/7/1998, 3:29 pm
Re: Punchline
Timothy - Toronto, Ontario -- 10/8/1998, 8:33 am
Re: Cadence
Nolan Penney -- 10/8/1998, 6:57 am