Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Laminated shaft
By:Timothy - Toronto, Ontario
Date: 10/6/1998, 1:34 pm
In Response To: Re: Laminated shaft (Don Beale)

"I have an experimantal Greenland type paddle that I laminated the shaft out of Fir. I'm OK with it so far, some tweaking to do on the shaft roundness and diameter (any suggestions?)."

I wanted to stay away from laminating, but now I'm questioning the wisdom of that. It's pretty hard to find a good enough piece of wood to carve a one peice paddle, at least around here. If you go to Chesapeake Light Craft's web site, you'll see a commercially made laminated paddle (link below).

The shaft dimensions are described in the articles I mentioned in my earlier posting. A rectangular shaft (example measurements can be found at http://user.itl.net/~kmansell/articles/lollysticks.html ), makes the most sense to me, but requires a thicker piece of wood.

"Maybe it's blasphemy... putting a 90 degree feather in..."

My reading indicates there was actually a great variety of styles among traditional paddles, including feathered. I would think the sliding stroke would get pretty complicated with a feathered blade, and a round shaft would be required, but one article described a Greenland paddle that had warped to a feather and the author said it worked fine.

laminiated paddle

Messages In This Thread

Greenland paddle links
Timothy - Toronto, Ontario -- 10/2/1998, 10:27 am
Length of Ancient paddles vs the Modern counterparts
Brian C. -- 10/2/1998, 11:01 am
I'll build one :)
Brian C. -- 10/5/1998, 6:39 pm
Re: you should
Nick Schade -- 10/6/1998, 2:42 pm
practice for when I get stuck on an Island
Brian C. -- 10/6/1998, 3:01 pm
Re: practice for when I get stuck on an Island
Jerry Weinraub -- 10/6/1998, 7:12 pm
Re: Laminated shaft
Don Beale -- 10/6/1998, 12:46 pm
Re: Laminated shaft
Timothy - Toronto, Ontario -- 10/6/1998, 1:34 pm
is a ferrule worth it on a greenland?
Brian C. -- 10/6/1998, 10:22 am
Re: is a ferrule worth it on a greenland?
Don Beale -- 10/6/1998, 5:36 pm
reinforcing paddle tips
Paul Jacobson -- 10/4/1998, 9:11 pm
Re: Length of Ancient paddles vs the Modern counterparts
Paul Stomski -- 10/2/1998, 8:54 pm
Re: Length of Ancient paddles vs the Modern counterparts
Timothy - Toronto, Ontario -- 10/2/1998, 2:23 pm
Where I got the picture
Brian C. -- 10/2/1998, 4:04 pm
Re: Where I got the picture
Roger Tulk -- 10/5/1998, 12:44 am
Mr. Hitchinson's book has photos
Brian C. -- 10/5/1998, 11:02 am
Re: Mr. Hitchinson's book has photos
Roger Tulk -- 10/7/1998, 12:23 am
I guess we could contact a museum...
Brian C. -- 10/6/1998, 1:51 pm
OK, I did!
Roger Tulk -- 10/12/1998, 9:17 pm
Re: OK, I did!
Mark Kanzler -- 10/14/1998, 3:44 pm
Re: Mr. Hitchinson's book has photos
Mark Kanzler -- 10/5/1998, 11:53 am
Sorry, that's Derek Hutchinson
Brian C. -- 10/6/1998, 12:31 am
Don't know
Brian C. -- 10/6/1998, 12:25 am
Found the book
Brian C. -- 10/6/1998, 12:38 am
Re: Length of Ancient paddles vs the Modern counterparts
Mark Kanzler -- 10/2/1998, 3:10 pm
Re: Length of Ancient paddles vs the Modern counterparts
Nick Schade -- 10/2/1998, 2:12 pm
Mystical Greenland paddle
Jay Babina -- 10/5/1998, 10:10 am
Re: Mystical Greenland paddle
Nick Schade -- 10/5/1998, 6:30 pm
Re: Use what works for you.
Mark Kanzler -- 10/5/1998, 6:59 pm
Re: Use what works for you.
Nick Schade -- 10/6/1998, 2:28 pm
Re: Length of Ancient paddles vs the Modern counterparts
Timothy - Toronto, Ontario -- 10/2/1998, 2:47 pm
Wide vs. Skinny paddle blades
David Dick -- 10/6/1998, 9:14 pm
Re: Length of Ancient paddles vs the Modern counterparts
Nick Schade -- 10/2/1998, 7:53 pm
length vs sprint/endurance
Brian C. -- 10/7/1998, 3:20 pm
Re: Length of Ancient paddles vs the Modern counterparts
Mark Kanzler -- 10/4/1998, 11:15 am
Re: Length of Ancient paddles vs the Modern counterparts
Nolan Penney -- 10/5/1998, 6:37 am
Re: Length of Ancient paddles vs the Modern counterparts
Nick Schade -- 10/6/1998, 6:25 pm
Re: Length of Ancient paddles vs the Modern counterparts
Nolan Penney -- 10/7/1998, 6:53 am
Re: Length of Ancient paddles vs the Modern counterparts
Nick Schade -- 10/7/1998, 2:09 pm
Re: Length of Ancient paddles vs the Modern counterparts
Nolan Penney -- 10/7/1998, 3:21 pm
Re: Paddle flutter
Timothy - Toronto, Ontario -- 10/7/1998, 2:47 pm
Re: Paddle flutter
Nick Schade -- 10/7/1998, 3:49 pm
Re: Length of Ancient paddles vs the Modern counterparts
Mark Kanzler -- 10/8/1998, 12:55 am
Re: Length of Ancient paddles vs the Modern counterparts
Nolan Penney -- 10/7/1998, 3:17 pm
Re: Cadence
Mark Kanzler -- 10/7/1998, 3:29 pm
Re: Punchline
Timothy - Toronto, Ontario -- 10/8/1998, 8:33 am
Re: Cadence
Nolan Penney -- 10/8/1998, 6:57 am