> We have developed a way where there is no runs no sag at all. All it
> requires is patience. After the wetout (where we squeegee most expoy back
> off so you can still see the weave) we use those yellow foam rollers made
> for epoxy to apply the fill the weave coats.

Has anyone tried those little "pads" for cutting in trim for painting? I would think the short (~1/8") bristles would be ideal for applying thin coats (after the wet out) of epoxy but I've never worked with epoxy so I don't know for sure. I really did like those little trim brushes for paint (nice even coat).

Just an idea,

Woody