Did you wash off any blush before applying the varnish? How long before varnishing did you apply the epoxy? Some epoxy needs to cure for quite a while before varnishing.

> I was wondering If anyone has had any luck with a spar varnish from
> "rule". It's called "Classic 450 Gloss" and the people
> I bought It from also sould me the West System Product I have been using
> on my Panache and they say the two products should be compatable but I
> have had problems with it taking over two days to dry and even then it
> sands a little funny like its still a bit gummy. The directions on the can
> say its fast drying and works with temp as as low as 60 degrees and my
> shop is 68 to 70,I have stired it well and let it sit for an hour before
> appling and my test piece had 6 oz cloth and three coats of West System
> resin sanded with a 80 grit sand paper before appling the varnish. I would
> also be insterested if anyone knows an e-mail address for the people at
> "rule" and I could also talk to them. Thanks in advance Wayne
> Bergman