Re: fairing inside hull
By:Mike Spence
Date: 12/9/1998, 12:23 am
Date: 12/9/1998, 12:23 am
In Response To: fairing inside hull (rick)
Here's another suggestion for you... try a _round_-face spokeshave. I used one on the outside of my Expedition Single (which as you may know has its fair share of concavities at the bow and stern), and wouldn't hesitate to use it on the inside as well. The only reason I haven't done so already is because I've packed things up for the winter - it's just too cold up here in Montreal to be working in an unheated area. Anyway, properly set, the results are quite acceptable.
Hope this additional option doesn't overwhelm you too much. :-)
Mike Spence
Messages In This Thread
- fairing inside hull
rick -- 12/8/1998, 1:33 am- Re: fairing inside hull
rick -- 12/9/1998, 11:06 am- Re: Drips are good!
Nick Schade -- 12/10/1998, 8:53 am- Re: fairing inside hull
Kenneth Paul -- 12/9/1998, 5:52 pm - Re: fairing inside hull
- A Convex Surform works GREAT, then sand paper
Jim Gabriel -- 12/9/1998, 10:12 am- Re: fairing inside hull
Mike Spence -- 12/9/1998, 12:23 am- Re: fairing inside hull
Nick Schade -- 12/8/1998, 9:55 am- Re: fairing inside hull
Jay Babina -- 12/8/1998, 9:55 am- Re: fairing inside hull
Jim Eisenmenger -- 12/8/1998, 8:45 am- Re: fairing inside hull
Monte Rhodes -- 12/9/1998, 1:43 pm
- Re: Drips are good!
- Re: fairing inside hull