Boat Building Forum
Find advice on all aspects of building your own kayak, canoe or any lightweight boats
Re: Varnish will nto stick to an epoxy/graphite mi
In Response To: Varnish will nto stick to an epoxy/graphite mix (Robert N Pruden)
: I tried using varnish on my hull that was coated with an epoxy/graphite
: powder mix: it didn't stick and was peeling notoriously within a week.
: Robert N Pruden
I varnished my hatch lips which are glass/epoxy/graphite. Sanded with 80 then 120 grit and no problems with the varnish adhesion. I also have a boat with epoxy/silica/graphite on the bottom but it is not varnished. That would defeat the purpose.
Glen in Baie-St-Paul.
Messages In This Thread
- Epoxy: Graphite Bottom - Varnish?
dave -- 4/14/2004, 12:34 am- Varnish will nto stick to an epoxy/graphite mix
Robert N Pruden -- 4/14/2004, 12:41 pm- Re: Varnish will nto stick to an epoxy/graphite mi
Glen Smith -- 4/14/2004, 12:55 pm
- Re: Epoxy: Graphite Bottom - Varnish?
Geoff Horsley -- 4/14/2004, 7:50 am- Re: Epoxy: Graphite Bottom - Varnish?
Jim in ND -- 4/14/2004, 12:47 am - Re: Varnish will nto stick to an epoxy/graphite mi
- Varnish will nto stick to an epoxy/graphite mix
