Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Other: BUT.., be careful.. *Pic*
By:Tom Bastiansen
Date: 12/3/2004, 10:29 am
In Response To: Re: Other: warped deck or hull *LINK* (john walker)

: Thanks for your help. I think i found the solution on this guys website

I have also used this method. Be careful, because it's a very powerful method. You can easily get stretch marks into the glass. Look at the picture below. I had to remove the glass and put on a new layer.

Best regards
Tom

Messages In This Thread

Other: warped deck or hull
john walker -- 12/1/2004, 5:18 pm
Re: Other: warped deck or hull
Rob Macks -- 12/2/2004, 7:10 pm
Re: Other: warped deck or hull
Robert N Pruden -- 12/2/2004, 8:23 pm
Re: Other: warped deck or hull
john walker -- 12/3/2004, 11:41 am
heat the clamp a little if you are worried
Robert N Pruden -- 12/3/2004, 4:30 pm
Re: Other: warped deck or hull *LINK*
john walker -- 12/2/2004, 12:31 pm
Re: Other: BUT.., be careful.. *Pic*
Tom Bastiansen -- 12/3/2004, 10:29 am
Re: Other: BUT.., be careful..
john walker -- 12/3/2004, 12:17 pm
That's a good method. *Pic*
Jesper Bach -- 12/3/2004, 4:41 am
Is it a strip or S&G deck? *LINK*
Robert N Pruden -- 12/2/2004, 10:06 am
Re: Other: warped deck or hull
Ken Blanton -- 12/2/2004, 5:46 am
Re: Other: warped deck or hull *Pic*
Jesper Bach -- 12/2/2004, 1:47 am
Re: Other: warped deck or hull
Barry Shelton -- 12/1/2004, 10:00 pm