Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: colouring + filling gaps on pine
By:George Jungle
Date: 12/5/2004, 6:22 pm
In Response To: colouring + filling gaps on pine (Erik, Belgium)

: I 'll be using pine on my next kayak as well. Just curious whether you filled
: the gaps with epoxy mixed with pine wood dust. Because that's what I did
: on the 2 WRC canoe hulls so far: mixing dust from the same wood in the
: filler epoxy. The result is a much darker fill, compared with WRC. If that
: 's the case with pine, it would show up much more because the pine strips
: are so pale.

: Beautiful boat you got there !

: Erik, Belgium.

Nice boat; is it a guillemot? I'm curious what your weight is so far..

Messages In This Thread

Strip: Day 107 of the 345 day stripper *Pic*
Justin L. -- 12/4/2004, 11:05 pm
Is that pine? It's really bright. *NM*
Robert N Pruden -- 12/5/2004, 10:18 am
Re: Is that pine? It's really bright.
Justin L. -- 12/5/2004, 11:35 am
Re: Is that pine? It's really bright. *Pic*
Justin L. -- 12/5/2004, 4:33 pm
colouring + filling gaps on pine
Erik, Belgium -- 12/5/2004, 4:55 pm
Re: colouring + filling gaps on pine
Brian Ervin -- 12/6/2004, 11:50 am
Re: colouring + filling gaps on pine
Richard Kohlström -- 12/5/2004, 6:22 pm
Re: colouring + filling gaps on pine
George Jungle -- 12/5/2004, 6:22 pm
Re: colouring + filling gaps on pine
Justin L. -- 12/6/2004, 8:50 pm