What he said. Hull first, whack the forms, re hot glue as needed to keep the forms on the hull then do the deck.

Glass
Pry as needed.
Paddle
repeat.

I use an external strong back myself, but I still do the same thing when I finish the deck, but he hull holds the forms without a strongback in place.

: When i lifted the hull off the forms and strongback (i decided to take the
: hull first, as it felt most ridgid), i had to wiggle it back and forth,
: and give the forms i could reach through the hatch opening (which i had
: precut loosely) a good whack with a hammer.

: As the hull was loosened from the 4-6 largest forms, the rest gave way
: easily. Only the bow took a good careful 15 minutes prying with a long
: stick and some nerve-wrecking hammering on it, to loosen. To avoid this,
: you could use internal stems.

: If the edges of your forms are coated with ducktape, you will have no prolems
: :-)

: Jesper