: I need to special order a piece of Ash for my coaming lip and was wondering
: if anybody could recommend how much I need. My bow and stern stem pieces
: have already been completed with white pine, so it's unlikely I'll use any
: that's leftover. I would like to just use white pine but from what I've
: read it needs to be about 1/16" thickness to safely bend it.

: I'd like the lip to extend out about 3/4" in thickness and be about
: 1/2" in height. The final lip dimensions will probably be somewhere
: around 32" long by 17" wide.
I did mine with walnut,not as bendy as ash, riped scrap into veneer thickness to glue up. You should be able to mail order 3/4" edge band stock, make sure to get it without hot glue.
Don