: it seems like this would be a lot easier than
: pouring on the epoxy and then trying to spread it all around evenly
: without disturbing and/or floating the glass, or getting runs or sagging.

It's subtle enough that you get accomplished builders who disagree on the same point. I like rollers because it's easier for me to control how much epoxy goes into the glass (stop as soon as the fabric goes clear); plus they tend to push the fabric down as you work. With the squeegee method, I never know when to stop in order to prevent starvation. Use short nap rollers (not foam) otherwise you'll have problems with them soaking up too much epoxy and... smoking. It's worth emphasizing Rod's point: different epoxies/fabrics/habits may favor one technique over another; I normally use Raka slow cure and 3.2oz tight-weave glass.

Chip
www.LorettaAndChip.com