Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Epoxy: Wetting out with roller
By:PatrickC
Date: 12/28/2004, 10:22 am
In Response To: Epoxy: Wetting out with roller (Randy Ricchi)

I tried a roller and did'nt like the foam, went back to squeegee and
cheap chip brushes, does the job fine. It's easy to tell if you used to much pressure with a squeegee the cloth turns white...I like to get it so the weave
is exposed but not white on the first coat..a slow roller and tip off with brush seems ok on subsequent coats.

Messages In This Thread

Epoxy: Wetting out with roller
Randy Ricchi -- 12/27/2004, 12:53 pm
Specialized Rollers
vk1nf -- 12/28/2004, 9:38 pm
Re: Epoxy: Wetting out with roller *LINK*
Rob Macks -- 12/28/2004, 11:14 am
Re: Epoxy: Wetting out with roller
Randy Ricchi -- 12/28/2004, 1:51 pm
Re: Epoxy: Wetting out with roller
PatrickC -- 12/28/2004, 10:22 am
Re: Epoxy: Wetting out with roller
Chip Sandresky -- 12/27/2004, 10:00 pm
Re: Epoxy: Wetting out with roller
Robert N Pruden -- 12/28/2004, 12:48 am
Re: Epoxy: Wetting out with roller
Rod Tait, Orca Boats -- 12/27/2004, 2:04 pm
Squeegee vs. rollers
Robert N Pruden -- 12/28/2004, 12:41 am
Re: Epoxy: Wetting out with roller
Thomas Duncan -- 12/27/2004, 6:07 pm