Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Epoxy: Another Wetting out Question
By:PatrickC
Date: 12/28/2004, 12:42 pm
In Response To: Epoxy: Another Wetting out Question (HowieE)

i wet/squeegee/tip off one side starting at stern or bow then do the other side.
Where the new/old epoxy meet at the keel "molts" and had no ridge or seam would be easy to sand smooth if it did..ie..the epoxy i used (system 3) gave me ample time to do the whole job.

By the time you've done the hull you'll be comfortable with it.

Messages In This Thread

Epoxy: Another Wetting out Question
HowieE -- 12/28/2004, 10:52 am
might not be much of an issue--this week
Paul G. Jacobson -- 12/28/2004, 5:40 pm
Re: Epoxy: Another Wetting out Question
PatrickC -- 12/28/2004, 12:42 pm
Re: Epoxy: Another Wetting out Question
Rob b -- 12/28/2004, 12:20 pm
Re: Epoxy: Another Wetting out Question *LINK*
Rob Macks -- 12/28/2004, 11:43 am
Attn: Rob Macks
Kurt Maurer -- 12/28/2004, 8:18 pm
Re: Attn: Kurt Mauer
Robert N Pruden -- 12/29/2004, 9:07 am
Re: Epoxy: Another Wetting out Question
Glen Smith -- 12/28/2004, 11:11 am