: I posted a couple of weeks ago about an issue I had with my sprayskirt coming
: off the coaming lip if I pushed down hard on the top of it. Suggestions
: were to extend the lip (it's now about 1/2" deep). I've thought of an
: idea that may or may not be good and would like to hear opinions on it.
: Would it be practical to take nylon string and epoxy it in place around the
: underside perimeter of the coaming lip? Seems like if the string was the
: same color as the coaming it would look OK.
: Any advice is appreciated,
: Bob
Hi Bob,
Might work, took a minute or two to figure out why you'd do that . I'd make a test piece first to try it, see if that much extra helps to hold the skirt or makes it easier for it to fall off. Only would need to be a few inches long matching the coaming/deck shape for you to tell if the addition would help or not using your skirt.
Bill H.
Messages In This Thread
- Other: Coaming problem # 2
BWarren -- 9/8/2007, 8:25 am- Re: Other: Coaming problem # 2
Bill Hamm -- 9/12/2007, 4:49 am- Re: Other: Coaming problem # 2
Bill Hamm -- 9/12/2007, 4:50 am
- Re: Other: Coaming problem # 2
Brian Nystrom -- 9/10/2007, 11:34 am- Re: Other: Coaming problem # 2
Bill Hamm -- 9/8/2007, 11:51 am- Re: Other: Coaming problem # 2
BWarren -- 9/9/2007, 5:47 am- Re: Other: Coaming problem # 2
Bill Hamm -- 9/9/2007, 4:29 pm
- Re: Other: Coaming problem # 2
- Re: Other: Coaming problem # 2
- Re: Other: Coaming problem # 2