Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Material: Polyurethane glue for laminating ste
By:Carl H
Date: 9/22/2007, 6:28 pm
In Response To: Re: Material: Polyurethane glue for laminating ste (Robert N Pruden)

Robert,

That sounds like a miscommunication. Resourcinols are typically dark and will leave dark glue lines. Gorilla Glue and the other Poly glues cure almost transparently. They work nicely with light or dark woods -- color doesn't matter. Contrary to what's been said elsewhere, the parts don't have to be clamped all that tightly. They just have to be made immobile so that the glue forces out instead of spreading the joint. Like epoxies, poly glues need a tiny bit of space so that they can form a layer of plastic. Clamp too tightly and you'll make a somewhat weaker joint.

Resourcinols are two-part glues that have to be measured and mixed. If you're going to measure and mix, then use epoxy. But epoxies are overkill for gluing strips. Just use a glue you can squeeze out of a bottle.

: I spoke with a guy at a wood sales shop just today about Gorilla Glue. He
: says that it dries "black" and suggested that I use resorcinol
: instead. I'll be starting my stripper this winter so am doing some
: homework on glues to use. FYI!

: Robert N Pruden

Messages In This Thread

Material: Polyurethane glue for laminating stems
Brian -- 9/18/2007, 1:35 pm
Stem Torture Test
Dan Price -- 9/21/2007, 10:38 am
Re: Stem Torture Test
Bill Hamm -- 9/21/2007, 7:40 pm
Re: Material: Polyurethane glue for laminating ste
Brian Nystrom -- 9/21/2007, 7:53 am
Re: Material: Polyurethane glue for laminating ste
Robert N Pruden -- 9/21/2007, 1:48 am
Re: Material: You Wanna' what?
Charlie -- 9/22/2007, 7:52 pm
The only name dropping that I'll ever do is...
Robert N Pruden -- 9/22/2007, 9:10 pm
Hot Fresh Bannock: Warning...
Robert N Pruden -- 9/22/2007, 9:14 pm
Re: Material: Polyurethane glue for laminating ste
Carl H -- 9/22/2007, 6:28 pm
Polyurethane glue vs epoxy
Jay Babina -- 9/20/2007, 8:58 am
Re: Polyurethane glue vs epoxy------WebKitFormBoun
Dan Caouette (CSFW)------WebKitFormBoundaryC5y+jEM -- 9/20/2007, 10:29 am
Re: Material: Polyurethane glue for laminating ste
Brian -- 9/19/2007, 12:47 pm
Re: Material: Polyurethane glue for laminating ste
John Eberly -- 9/19/2007, 11:49 am
Re: Material: Polyurethane glue for laminating ste
Dan Caouette (CSFW) -- 9/19/2007, 7:57 am
Re: Material: Polyurethane glue for laminating ste
TOM RAYMOND -- 9/19/2007, 11:18 am
Re: Material: Polyurethane glue for laminating ste
Jay Babina -- 9/21/2007, 9:57 am
Re: Material: Polyurethane glue for laminating ste
Acors -- 9/21/2007, 12:23 pm
Re: Material: Polyurethane glue for laminating ste
TOM RAYMOND -- 9/28/2007, 11:38 am
Re: Material: Polyurethane glue for laminating ste
Dan Caouette (CSFW) -- 9/21/2007, 11:26 am
Re: Material: Polyurethane glue for laminating ste
Jay Babina -- 9/23/2007, 9:34 am
Re: Material: Polyurethane glue for laminating ste
Mike Savage -- 9/23/2007, 10:52 am
Re: Material: Polyurethane glue for laminating ste
Charlie -- 9/21/2007, 10:29 am
Re: Material: Polyurethane glue for laminating ste
Dan Caouette (CSFW) -- 9/19/2007, 12:28 pm
Re: Material: Polyurethane glue for laminating ste
Mark Rakestraw -- 9/19/2007, 6:30 am
Re: Material: Polyurethane glue for laminating ste
Carl H -- 9/18/2007, 9:03 pm
Re: Material: Polyurethane glue for laminating ste
Bill Hamm -- 9/18/2007, 6:10 pm
Re: Material: Polyurethane glue for laminating ste
Dan Price -- 9/18/2007, 2:27 pm