: I just finished the final draft of the deck I'm going to put on the Ken
: Taylor semi-replica that I'm building. A picture is attached below of the
: stations. The deck is rather modern with good bump outs for the knees, a
: 12" height at the front of the cockpit (31"x16"). It also
: has good height at the feet and should fit size 11 feet for sure. I'm a
: bit torn about the deck. I feel it's going to look nice and be very comfy,
: but it goes pretty far from the original and the AA or even the Pintail.

: Any thoughts on how this deck looks? Ideas for changes?

: BTW, the sheerline gets cut in the morning, sanding, and, hopefully, dyeing
: the hull will be finished in the morning.

Looks nice to me, suspect you'll be using really skinny strips though to plank that edge on the deck, maybe 3/8" wide ones like I used on the chine on my boat with a similiar radius.

Bill H.