Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

According to Interlux: YES *LINK*
By:Dan Caouette (CSFW)
Date: 10/25/2007, 11:33 am
In Response To: Re: Strip: spraying varnish with a hvlp gun (rich)

It can be rolled and tipped. Use a fine, solvent-resistant roller cover and tip with a badger or chine brush. Foam brushes don't do well with the solvents. I haven't tried it yet but the varnish has the same consistency as the paint. Based on how the paint goes down It should roll and tip fine. Below is the link to the Intelux's page on Perfection Varnish. Download the Product Data Sheet and the MSDS to see what your getting into.

Dan

Interlux

Messages In This Thread

Strip: spraying varnish with a hvlp gun
rich -- 10/24/2007, 1:02 pm
Re: Strip: spraying varnish with a hvlp gun
Dan Caouette (CSFW) -- 10/24/2007, 1:13 pm
Re: Strip: spraying varnish with a hvlp gun
Acors -- 10/24/2007, 4:18 pm
Re: Strip: spraying varnish with a hvlp gun
rich -- 10/24/2007, 8:29 pm
Re: Strip: spraying varnish with a hvlp gun *LINK* *Pic*
Dan Caouette (CSFW) -- 10/25/2007, 8:38 am
Re: Strip: spraying varnish with a hvlp gun
rich -- 10/25/2007, 10:43 am
Re: Strip: spraying varnish with a hvlp gun------W *LINK*
Dan Caouette (CSFW)------WebKitFormBoundaryDXxLbDX -- 10/25/2007, 11:32 am
According to Interlux: YES *LINK*
Dan Caouette (CSFW) -- 10/25/2007, 11:33 am
Re: Strip: spraying varnish with a hvlp gun
Doug Smith -- 10/25/2007, 10:03 am
Re: Strip: spraying varnish with a hvlp gun
Dan Caouette (CSFW) -- 10/25/2007, 11:46 am
Re: Strip: spraying varnish with a hvlp gun
Pat Deopp -- 10/24/2007, 3:18 pm
Re: Strip: spraying varnish with a hvlp gun
Acors -- 10/24/2007, 1:06 pm