Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Recessed Deck Fittings - Back to Fittings
By:Nick Schade - Guillemot Kayaks
Date: 10/31/2007, 8:31 pm
In Response To: Re: Recessed Deck Fittings - Back to Fittings (Bryan Hansel)

: Is this last template also the one that cuts the hole in the deck? If so, was
: that done just by using a larger diameter template guide?

Essentially yes. I bought a template guide that had a collar that fit over the initial guide to make it bigger. The difference in radius between the guide with and without the collar is the same as the diameter of the straight bit.

So if I used a 1/8" bit and started with 1/4" guide the collar added 1/8" in radius for a 1/2" diameter.

The set I bought include the guide, the collar plus the bit.

Messages In This Thread

Strip: Recessed Deck Fittings *LINK*
Bryan Hansel -- 10/20/2007, 12:13 am
Re: Strip: Recessed Deck Fittings *LINK* *Pic*
Andy Waddington -- 10/27/2007, 8:32 am
Re: Strip: Recessed Deck Fittings
Bryan Hansel -- 10/27/2007, 10:31 pm
Re: Strip: Recessed Deck Fittings
Andy Waddington -- 10/30/2007, 1:24 pm
Re: Strip: Recessed Deck Fittings
Bryan Hansel -- 10/30/2007, 6:09 pm
Re: Strip: Recessed Deck Fittings
William Cruz -- 10/30/2007, 11:59 pm
Re: Strip: Recessed Deck Fittings
Bryan Hansel -- 10/31/2007, 10:13 am
Re: Strip: Recessed Deck Fittings
Bill Hamm -- 11/1/2007, 1:31 am
Re: Strip: Recessed Deck Fittings
Andy Waddington -- 11/1/2007, 7:33 am
Re: Strip: Recessed Deck Fittings
Gennie -- 11/2/2007, 10:38 am
Re: Strip: Recessed Deck Fittings
Bill Hamm -- 11/1/2007, 4:50 pm
Safety suggestion.
Paul G. Jacobson -- 10/31/2007, 7:32 pm
Re: Strip: Recessed Deck Fittings
Bill Hamm -- 10/28/2007, 1:29 am
Re: Strip: Recessed Deck Fittings
Bryan Hansel -- 10/28/2007, 12:26 pm
Re: Strip: Recessed Deck Fittings
Bill Hamm -- 10/28/2007, 9:46 pm
Re: Strip: Recessed Deck Fittings
Bill Hamm -- 10/28/2007, 9:45 pm
Re: Strip: Recessed Deck Fittings *LINK*
Nick Schade - Guillemot Kayaks -- 10/20/2007, 10:13 am
Re: Strip: RDeck Fittings - Router Set-up?
Bryan Hansel -- 10/20/2007, 11:08 am
Re: Strip: RDeck Fittings - Router Set-up? *LINK*
Daren -- 10/20/2007, 11:29 am
Re: Strip: RDeck Fittings - Router Set-up?
Bryan Hansel -- 10/20/2007, 11:37 am
Re: Strip: RDeck Fittings - Router Set-up?
Daren -- 10/20/2007, 11:42 am
Re: Strip: RDeck Fittings - Router Set-up?
Bryan Hansel -- 10/20/2007, 11:23 pm
options
Daren -- 10/20/2007, 11:55 pm
Re: Strip: Recessed Deck Fittings *LINK* *Pic*
Daren -- 10/20/2007, 7:15 am
Re: Recessed Deck Fittings - Back to Fittings
Bryan Hansel -- 10/31/2007, 11:15 am
Re: Recessed Deck Fittings - Back to Fittings
Daren -- 11/3/2007, 9:12 am
Re: Recessed Deck Fittings - Back to Fittings *Pic*
Doug Smith -- 10/31/2007, 7:27 pm
Re: Recessed Deck Fittings - Back to Fittings
Bryan Hansel -- 11/1/2007, 12:14 pm
Re: Recessed Deck Fittings - Back to Fittings
Nick Schade - Guillemot Kayaks -- 10/31/2007, 8:33 pm
Re: Recessed Deck Fittings - Back to Fittings
Nick Schade - Guillemot Kayaks -- 10/31/2007, 12:52 pm
Re: Recessed Deck Fittings - Back to Fittings
Bryan Hansel -- 10/31/2007, 5:37 pm
Re: Recessed Deck Fittings - Back to Fittings
Nick Schade - Guillemot Kayaks -- 10/31/2007, 8:31 pm
Re: Recessed Deck Fittings - Back to Fittings
Bryan Hansel -- 11/1/2007, 12:11 pm
Re: Recessed Deck Fittings - Back to Fittings
Nick Schade - Guillemot Kayaks -- 11/1/2007, 3:47 pm
Nice photos, nice application! *NM*
William Cruz -- 10/30/2007, 11:47 pm
Re: Strip: Recessed Deck Fittings
Dan Caouette (CSFW) -- 10/22/2007, 9:54 am
Re: Strip: Recessed Deck Fittings
John Van Buren -- 10/22/2007, 7:31 am