Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Recessed Deck Fittings - Back to Fittings
By:Daren
Date: 11/3/2007, 9:12 am
In Response To: Re: Recessed Deck Fittings - Back to Fittings (Bryan Hansel)

Bryan;

sorry i missed this post. looks like you've got all the help you needed, but i'll explain my jig anyway.

the bosch RA1125 template guide kit is what i use. the jig plate for cutting out the cup has a 1 7/8 hole in it. with the 1/2" deepcutting corebox i use the 1 3/8 template guide. to cut the outer rim of the cup i use a 3/16 straight bit with a 7/16 template guide and the same 1 7/8 jig plate. the crossbar dovetail is done with a seperate jig plate, obviously.
this was my second set up. in the first, before i had the bosch router, i had to use two different jig plates cause i couldn't get (figure out?) a jig/bit/template combination that would work useing only one jig plate.

DarenN.........

: Daren,

: I finally got the router templates - had to order from Amazon - and I'm
: slightly puzzled about what to do next. I'm trying to follow Nick's
: instructions, but it's just not clicking for me. Namely, how many jig
: templates do I have to make?

: Thanks

Messages In This Thread

Strip: Recessed Deck Fittings *LINK*
Bryan Hansel -- 10/20/2007, 12:13 am
Re: Strip: Recessed Deck Fittings *LINK* *Pic*
Andy Waddington -- 10/27/2007, 8:32 am
Re: Strip: Recessed Deck Fittings
Bryan Hansel -- 10/27/2007, 10:31 pm
Re: Strip: Recessed Deck Fittings
Andy Waddington -- 10/30/2007, 1:24 pm
Re: Strip: Recessed Deck Fittings
Bryan Hansel -- 10/30/2007, 6:09 pm
Re: Strip: Recessed Deck Fittings
William Cruz -- 10/30/2007, 11:59 pm
Re: Strip: Recessed Deck Fittings
Bryan Hansel -- 10/31/2007, 10:13 am
Re: Strip: Recessed Deck Fittings
Bill Hamm -- 11/1/2007, 1:31 am
Re: Strip: Recessed Deck Fittings
Andy Waddington -- 11/1/2007, 7:33 am
Re: Strip: Recessed Deck Fittings
Gennie -- 11/2/2007, 10:38 am
Re: Strip: Recessed Deck Fittings
Bill Hamm -- 11/1/2007, 4:50 pm
Safety suggestion.
Paul G. Jacobson -- 10/31/2007, 7:32 pm
Re: Strip: Recessed Deck Fittings
Bill Hamm -- 10/28/2007, 1:29 am
Re: Strip: Recessed Deck Fittings
Bryan Hansel -- 10/28/2007, 12:26 pm
Re: Strip: Recessed Deck Fittings
Bill Hamm -- 10/28/2007, 9:46 pm
Re: Strip: Recessed Deck Fittings
Bill Hamm -- 10/28/2007, 9:45 pm
Re: Strip: Recessed Deck Fittings *LINK*
Nick Schade - Guillemot Kayaks -- 10/20/2007, 10:13 am
Re: Strip: RDeck Fittings - Router Set-up?
Bryan Hansel -- 10/20/2007, 11:08 am
Re: Strip: RDeck Fittings - Router Set-up? *LINK*
Daren -- 10/20/2007, 11:29 am
Re: Strip: RDeck Fittings - Router Set-up?
Bryan Hansel -- 10/20/2007, 11:37 am
Re: Strip: RDeck Fittings - Router Set-up?
Daren -- 10/20/2007, 11:42 am
Re: Strip: RDeck Fittings - Router Set-up?
Bryan Hansel -- 10/20/2007, 11:23 pm
options
Daren -- 10/20/2007, 11:55 pm
Re: Strip: Recessed Deck Fittings *LINK* *Pic*
Daren -- 10/20/2007, 7:15 am
Re: Recessed Deck Fittings - Back to Fittings
Bryan Hansel -- 10/31/2007, 11:15 am
Re: Recessed Deck Fittings - Back to Fittings
Daren -- 11/3/2007, 9:12 am
Re: Recessed Deck Fittings - Back to Fittings *Pic*
Doug Smith -- 10/31/2007, 7:27 pm
Re: Recessed Deck Fittings - Back to Fittings
Bryan Hansel -- 11/1/2007, 12:14 pm
Re: Recessed Deck Fittings - Back to Fittings
Nick Schade - Guillemot Kayaks -- 10/31/2007, 8:33 pm
Re: Recessed Deck Fittings - Back to Fittings
Nick Schade - Guillemot Kayaks -- 10/31/2007, 12:52 pm
Re: Recessed Deck Fittings - Back to Fittings
Bryan Hansel -- 10/31/2007, 5:37 pm
Re: Recessed Deck Fittings - Back to Fittings
Nick Schade - Guillemot Kayaks -- 10/31/2007, 8:31 pm
Re: Recessed Deck Fittings - Back to Fittings
Bryan Hansel -- 11/1/2007, 12:11 pm
Re: Recessed Deck Fittings - Back to Fittings
Nick Schade - Guillemot Kayaks -- 11/1/2007, 3:47 pm
Nice photos, nice application! *NM*
William Cruz -- 10/30/2007, 11:47 pm
Re: Strip: Recessed Deck Fittings
Dan Caouette (CSFW) -- 10/22/2007, 9:54 am
Re: Strip: Recessed Deck Fittings
John Van Buren -- 10/22/2007, 7:31 am