Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Strip: 1/4" or 5/16" bead and cove bits------W
By:ryan Cole------WebKitFormBoundaryviKCR+soF4sl33B3
Date: 11/26/2007, 1:26 am
In Response To: Strip: 1/4" or 5/16" bead and cove bits (chuck in wa)

I would go with 1/4 instead of 5/16. I have a custom 3/16 bit which I had a bit company make for me (stacked bit with the bead and cove on the same bit, works well, cost about $120). I like it. For your situation I'd use the 1/4.

------WebKitFormBoundaryviKCR+soF4sl33B3

Messages In This Thread

Strip: 1/4" or 5/16" bead and cove bits
chuck in wa -- 11/26/2007, 1:13 am
Re: Strip: 1/4" or 5/16" bead and cove bits
chuck in wa -- 11/28/2007, 1:33 am
Re: Strip: 1/4" or 5/16" bead and cove bits
Bryan Hansel -- 11/26/2007, 9:13 am
Re: Strip: 1/4" or 5/16" bead and cove bits------W
ryan Cole------WebKitFormBoundaryviKCR+soF4sl33B3 -- 11/26/2007, 1:26 am