Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Strip: Spray finishes
By:Mike Savage
Date: 12/18/2007, 7:42 am
In Response To: Re: Strip: Spray finishes (John Monroe)

: Mike one area to be very careful with is the centerline of the hull of the
: shooting star. I thought I had mine perfectly strait but I have a slight
: glide to port. I can't see the cause and I'm sure I could fix it but it's
: really not a problem. I added a polypropylene rub strip that makes a
: pronounced bulge that look good but maybe is a slight causation. Is that a
: word?

: John

Thanks for the heads-up, John. I have a pair of laser levels I will be setting up for guides. The laser head gives a 90 degree fan. Doesn't get in the way as much as string. :)
I'll probably go for added glass for a rub-strip if needed. If I treat it like my SoF's, it shouldn't be needed.

Yup, causation is a real word. And perfectly used. :)
(it's nice to see interesting word usage, it happens too little now.)

Mike Savage
South West Cork

Messages In This Thread

Strip: Spray finishes
Mike Bielski -- 12/14/2007, 2:27 pm
Re: Strip: Spray finishes
Paul G. Jacobson -- 12/16/2007, 5:20 pm
Re: Strip: Spray finishes *Pic*
Roger Turgeon -- 12/15/2007, 8:46 am
Re: Strip: Spray finishes------WebKitFormBoundary+
Mike Bielski------WebKitFormBoundary+XGdOpfdXLb1MY -- 12/15/2007, 7:12 pm
Re: Strip: Spray finishes *Pic*
Roger Turgeon -- 12/15/2007, 8:50 am
Re: Strip: Spray finishes *LINK*
Dan Caouette (CSFW) -- 12/14/2007, 3:18 pm
Re: Strip: Spray finishes
Mike Bielski -- 12/14/2007, 4:07 pm
Re: Strip: Spray finishes
Dan Caouette (CSFW) -- 12/15/2007, 7:16 am
Re: Strip: Spray finishes
Mike Bielski -- 12/15/2007, 8:41 am
Re: Strip: Spray finishes
Mike Savage -- 12/15/2007, 9:20 am
Re: Strip: Spray finishes
Mike Bielski -- 12/15/2007, 6:56 pm
Re: Strip: Spray finishes
Mike Savage -- 12/15/2007, 10:46 pm
Re: Strip: Spray finishes
John Monroe -- 12/18/2007, 6:03 am
Re: Strip: Spray finishes
Mike Savage -- 12/18/2007, 7:42 am
Re: Strip: Spray finishes
Mike Bielski -- 12/15/2007, 11:19 pm
Re: Strip: Spray finishes
Mike Savage -- 12/16/2007, 1:56 pm
Van Dam Wood Craft *LINK*
Mike Bielski -- 12/14/2007, 2:35 pm