I have trouble connecting to John's website. The home page appears but what apparently are the links at the bottom just show up as partial boxes with an "X" and the links are not operational?

Any suggestions.

: Using that thin strip ripping jig works fine for a few strips, but if you are
: serious about cutting the 60 or 70 strips required for a small boat of any
: kind, it will soon get very tiresome. You have to move the fence for every
: cut, and with the number of strips needed, it is inevitable that
: differences in thickness will occur.

: I prefer to use a table saw and gang cut with two thin kerf blades, setting
: the fence only once. See my web site at the link below for a detailed
: discussion on strip making. Scroll to the bottom of the opening page and
: double click on My Web Site, then click Builders Corner, and select Making
: Strips.

: - John