Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

To V Or Not To V------WebKitFormBoundaryHGkfW3+5m+
By:Jay Babina------WebKitFormBoundaryHGkfW3+5m+ViUKBv
Date: 1/7/2008, 9:21 am
In Response To: Other: To V Or Not To V (Dave Reekie)

The only "V" bottom hulls I know of are the Necky Arulk II and the Eddyline Falcon 16 - both have been taken off the market. The Eddyline Fallcone 16 used to frighten new buyers. Both were very tippy. The Nigel Foster silouhette is a mild "V" hull and although has nice traits can be a bit tippy. In my experience, "V" hulls teeter back and forth and you are never sitting comfortably in a smooth stable spot. You do gain speed but I don't like the sacrifice.

I find the Anas very flat on the bottom in the mid section. I find most home built hard chine boats pretty flat in the mid section. Your stability will be determined by width and how far you carry that flatness forward and back.

If I were you, I would try some boats and make an angle gauge and record what youÊlike. Because if you put all that work into building a boat with a "V" hull and it teeters back an forth, you will not be a happy person to say the least.

Years back, my brother and I build Chesapeake Light Craft 17' s at the same time. Mine got a little more "V" in the hull than his. Mine sucked. It teetered back and forth. His was OK. It doesn't take much "V" to get that teetering back and forth thing. It has to do with the weight / ratio capacity. If you put a "V" hull boat on land - that's the effect. The same boat can teeter a light person and a heaver person will sink it a bit and not get it.

------WebKitFormBoundaryHGkfW3+5m+ViUKBv

Messages In This Thread

Other: To V Or Not To V
Dave Reekie -- 1/7/2008, 4:51 am
Why I wouldn't want a flat bottom.
John Monroe -- 1/11/2008, 6:14 am
Re: Why I wouldn't want a flat bottom.
Bryan Hansel -- 1/18/2008, 8:56 am
Re: Why I wouldn't want a flat bottom.
John Monroe -- 1/19/2008, 4:49 am
Re: Why I wouldn't want a flat bottom. *LINK*
Bryan Hansel -- 1/19/2008, 9:30 pm
Re: Why I wouldn't want a flat bottom.
John Monroe -- 1/20/2008, 4:47 am
Re: Why I wouldn't want a flat bottom.
Kris Buttermore -- 1/22/2008, 1:28 pm
Re: Why I wouldn't want a flat bottom.
Bryan Hansel -- 1/20/2008, 7:07 pm
Re: Why I wouldn't want a flat bottom.
Bill Hamm -- 1/17/2008, 8:10 pm
Re: Why I wouldn't want a flat bottom.
John Monroe -- 1/18/2008, 5:18 am
Re: Why I wouldn't want a flat bottom.
Mike Savage -- 1/11/2008, 12:06 pm
Re: Why I wouldn't want a flat bottom.
John Monroe -- 1/12/2008, 4:14 am
Size matters with flat bottoms
Paul G. Jacobson -- 1/12/2008, 4:15 pm
part 2 of above *Pic*
Paul G. Jacobson -- 1/15/2008, 1:07 am
Re: part 2 of above
John Monroe -- 1/18/2008, 5:04 am
Re: part 2 of above
Paul G. Jacobson -- 1/18/2008, 6:25 pm
Re: Other: To V Or Not To V
Bill Hamm -- 1/8/2008, 5:34 am
it goes deeper than a deep V *Pic*
Paul G. Jacobson -- 1/7/2008, 10:42 pm
To V Or Not To V------WebKitFormBoundaryHGkfW3+5m+
Jay Babina------WebKitFormBoundaryHGkfW3+5m+ViUKBv -- 1/7/2008, 9:21 am
Re: To V Or Not To V------WebKitFormBoundaryHGkfW3
Bill Hamm -- 1/8/2008, 5:29 am
Re: To V Or Not To V------WebKitFormBoundaryHGkfW3 *LINK* *Pic*
Dave Reekie -- 1/7/2008, 9:43 am
Re: To V Or Not To V------WebKitFormBoundaryHGkfW3
Tom Simpson -- 1/9/2008, 3:28 am
Re: To V Or Not To V------WebKitFormBoundaryHGkfW3 *LINK* *Pic*
David Reekie -- 1/10/2008, 6:38 am
Re: To V Or Not To V------WebKitFormBoundaryHGkfW3
Tom Simpson -- 1/10/2008, 10:42 pm
Re: To V Or Not To V------WebKitFormBoundaryHGkfW3
David Reekie -- 1/16/2008, 3:53 am
V-hull or not
Jay Babina -- 1/7/2008, 10:21 am
Re: V-hull or not
Dave Reekie -- 1/7/2008, 12:18 pm
V-hull or not------WebKitFormBoundarygF0AAApM+kRZG
Jay Babina------WebKitFormBoundarygF0AAApM+kRZGKWR -- 1/7/2008, 12:29 pm
Re: V-hull or not------WebKitFormBoundarygF0AAApM+
Toni V -- 1/8/2008, 2:11 pm
Re: V-hull or not------WebKitFormBoundarygF0AAApM+
Mike Savage -- 1/8/2008, 6:46 pm
Re: Other: To V Or Not To V
skiffrace -- 1/7/2008, 8:04 am
Re: Other: To V Or Not To V
Dave Reekie -- 1/7/2008, 9:24 am
Re: Other: To V Or Not To V
skiffrace -- 1/7/2008, 9:53 am
Re: Other: To V Or Not To V
Dave Reekie -- 1/7/2008, 10:26 am
Re: Other: To V Or Not To V
Toni V -- 1/8/2008, 2:05 pm
Re: Other: To V Or Not To V
David Reekie -- 1/10/2008, 6:44 am