Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: To V Or Not To V------WebKitFormBoundaryHGkfW3 *LINK* *Pic*
By:Dave Reekie
Date: 1/7/2008, 9:43 am
In Response To: To V Or Not To V------WebKitFormBoundaryHGkfW3+5m+ (Jay Babina------WebKitFormBoundaryHGkfW3+5m+ViUKBv)

Thanks Jay. Maybe I was wrong about the Anas in the very mid section - although from photos it certainly looks like the chines are a bit above the keel. The bow though is surely very V'd much further back than on many other designs, looking at the very high chines. Picture of the Q-boat successor to the Anas below.

Interesting comments about your experiences in Chesapeake 17s. Are you effectively saying that the more V'd one had lower primary stability but higher secondary, and would sit on a chine - as you might want when carving turns - very happily? If so, then that as a behaviour sounds like it's not necessarily a bad thing - as long as the primary stability is enough so that it will sit level when you want it to!

My last kayak was quite V'd - see linked linesplan below - and felt plenty stable enough both for me at 165lb and for my wife at a lot less. I'm doing another similar version but a bit bigger, for me this time, and have ended up with a much flatter bottom along more of the length and am wondering how they will compare...

linesplan of my last kayak

Messages In This Thread

Other: To V Or Not To V
Dave Reekie -- 1/7/2008, 4:51 am
Why I wouldn't want a flat bottom.
John Monroe -- 1/11/2008, 6:14 am
Re: Why I wouldn't want a flat bottom.
Bryan Hansel -- 1/18/2008, 8:56 am
Re: Why I wouldn't want a flat bottom.
John Monroe -- 1/19/2008, 4:49 am
Re: Why I wouldn't want a flat bottom. *LINK*
Bryan Hansel -- 1/19/2008, 9:30 pm
Re: Why I wouldn't want a flat bottom.
John Monroe -- 1/20/2008, 4:47 am
Re: Why I wouldn't want a flat bottom.
Kris Buttermore -- 1/22/2008, 1:28 pm
Re: Why I wouldn't want a flat bottom.
Bryan Hansel -- 1/20/2008, 7:07 pm
Re: Why I wouldn't want a flat bottom.
Bill Hamm -- 1/17/2008, 8:10 pm
Re: Why I wouldn't want a flat bottom.
John Monroe -- 1/18/2008, 5:18 am
Re: Why I wouldn't want a flat bottom.
Mike Savage -- 1/11/2008, 12:06 pm
Re: Why I wouldn't want a flat bottom.
John Monroe -- 1/12/2008, 4:14 am
Size matters with flat bottoms
Paul G. Jacobson -- 1/12/2008, 4:15 pm
part 2 of above *Pic*
Paul G. Jacobson -- 1/15/2008, 1:07 am
Re: part 2 of above
John Monroe -- 1/18/2008, 5:04 am
Re: part 2 of above
Paul G. Jacobson -- 1/18/2008, 6:25 pm
Re: Other: To V Or Not To V
Bill Hamm -- 1/8/2008, 5:34 am
it goes deeper than a deep V *Pic*
Paul G. Jacobson -- 1/7/2008, 10:42 pm
To V Or Not To V------WebKitFormBoundaryHGkfW3+5m+
Jay Babina------WebKitFormBoundaryHGkfW3+5m+ViUKBv -- 1/7/2008, 9:21 am
Re: To V Or Not To V------WebKitFormBoundaryHGkfW3
Bill Hamm -- 1/8/2008, 5:29 am
Re: To V Or Not To V------WebKitFormBoundaryHGkfW3 *LINK* *Pic*
Dave Reekie -- 1/7/2008, 9:43 am
Re: To V Or Not To V------WebKitFormBoundaryHGkfW3
Tom Simpson -- 1/9/2008, 3:28 am
Re: To V Or Not To V------WebKitFormBoundaryHGkfW3 *LINK* *Pic*
David Reekie -- 1/10/2008, 6:38 am
Re: To V Or Not To V------WebKitFormBoundaryHGkfW3
Tom Simpson -- 1/10/2008, 10:42 pm
Re: To V Or Not To V------WebKitFormBoundaryHGkfW3
David Reekie -- 1/16/2008, 3:53 am
V-hull or not
Jay Babina -- 1/7/2008, 10:21 am
Re: V-hull or not
Dave Reekie -- 1/7/2008, 12:18 pm
V-hull or not------WebKitFormBoundarygF0AAApM+kRZG
Jay Babina------WebKitFormBoundarygF0AAApM+kRZGKWR -- 1/7/2008, 12:29 pm
Re: V-hull or not------WebKitFormBoundarygF0AAApM+
Toni V -- 1/8/2008, 2:11 pm
Re: V-hull or not------WebKitFormBoundarygF0AAApM+
Mike Savage -- 1/8/2008, 6:46 pm
Re: Other: To V Or Not To V
skiffrace -- 1/7/2008, 8:04 am
Re: Other: To V Or Not To V
Dave Reekie -- 1/7/2008, 9:24 am
Re: Other: To V Or Not To V
skiffrace -- 1/7/2008, 9:53 am
Re: Other: To V Or Not To V
Dave Reekie -- 1/7/2008, 10:26 am
Re: Other: To V Or Not To V
Toni V -- 1/8/2008, 2:05 pm
Re: Other: To V Or Not To V
David Reekie -- 1/10/2008, 6:44 am