Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Other: To V Or Not To V
By:skiffrace
Date: 1/7/2008, 9:53 am
In Response To: Re: Other: To V Or Not To V (Dave Reekie)

: Tom,

: Yes, almost all kayaks have more V in the ends than the middle - as do mine -
: but that's a very crude simplification. As I said, if you look at designs
: such as Idglorssuit or Anas Acuta vs Black Pearl or Petrel they are at
: very different ends of the spectrum, and I'm interested in views on how
: this affects the kayak's behaviour.

: thanks,

: dave

Dave,
The main point I was attempting to make: take existing (tried and true) patterns and do not tinker with them much - more harm than good will result.

Yes, what I wrote is a simplified description of the existing kayaks. However, it looks that you may be trying too hard to squeeze an extra inch in one area, and will loose a foot in several others.

As Jay wrote: the amount of time (and money) invested in the boat you will build is so great it's not the place to take 'bold' design risks.

If you can build a floating prototype in a week or 2 then experiment with new ideas, which brings the following to mind: how about making simple SOF and if you like it then replicate the design in your S&G boat.

Messages In This Thread

Other: To V Or Not To V
Dave Reekie -- 1/7/2008, 4:51 am
Why I wouldn't want a flat bottom.
John Monroe -- 1/11/2008, 6:14 am
Re: Why I wouldn't want a flat bottom.
Bryan Hansel -- 1/18/2008, 8:56 am
Re: Why I wouldn't want a flat bottom.
John Monroe -- 1/19/2008, 4:49 am
Re: Why I wouldn't want a flat bottom. *LINK*
Bryan Hansel -- 1/19/2008, 9:30 pm
Re: Why I wouldn't want a flat bottom.
John Monroe -- 1/20/2008, 4:47 am
Re: Why I wouldn't want a flat bottom.
Kris Buttermore -- 1/22/2008, 1:28 pm
Re: Why I wouldn't want a flat bottom.
Bryan Hansel -- 1/20/2008, 7:07 pm
Re: Why I wouldn't want a flat bottom.
Bill Hamm -- 1/17/2008, 8:10 pm
Re: Why I wouldn't want a flat bottom.
John Monroe -- 1/18/2008, 5:18 am
Re: Why I wouldn't want a flat bottom.
Mike Savage -- 1/11/2008, 12:06 pm
Re: Why I wouldn't want a flat bottom.
John Monroe -- 1/12/2008, 4:14 am
Size matters with flat bottoms
Paul G. Jacobson -- 1/12/2008, 4:15 pm
part 2 of above *Pic*
Paul G. Jacobson -- 1/15/2008, 1:07 am
Re: part 2 of above
John Monroe -- 1/18/2008, 5:04 am
Re: part 2 of above
Paul G. Jacobson -- 1/18/2008, 6:25 pm
Re: Other: To V Or Not To V
Bill Hamm -- 1/8/2008, 5:34 am
it goes deeper than a deep V *Pic*
Paul G. Jacobson -- 1/7/2008, 10:42 pm
To V Or Not To V------WebKitFormBoundaryHGkfW3+5m+
Jay Babina------WebKitFormBoundaryHGkfW3+5m+ViUKBv -- 1/7/2008, 9:21 am
Re: To V Or Not To V------WebKitFormBoundaryHGkfW3
Bill Hamm -- 1/8/2008, 5:29 am
Re: To V Or Not To V------WebKitFormBoundaryHGkfW3 *LINK* *Pic*
Dave Reekie -- 1/7/2008, 9:43 am
Re: To V Or Not To V------WebKitFormBoundaryHGkfW3
Tom Simpson -- 1/9/2008, 3:28 am
Re: To V Or Not To V------WebKitFormBoundaryHGkfW3 *LINK* *Pic*
David Reekie -- 1/10/2008, 6:38 am
Re: To V Or Not To V------WebKitFormBoundaryHGkfW3
Tom Simpson -- 1/10/2008, 10:42 pm
Re: To V Or Not To V------WebKitFormBoundaryHGkfW3
David Reekie -- 1/16/2008, 3:53 am
V-hull or not
Jay Babina -- 1/7/2008, 10:21 am
Re: V-hull or not
Dave Reekie -- 1/7/2008, 12:18 pm
V-hull or not------WebKitFormBoundarygF0AAApM+kRZG
Jay Babina------WebKitFormBoundarygF0AAApM+kRZGKWR -- 1/7/2008, 12:29 pm
Re: V-hull or not------WebKitFormBoundarygF0AAApM+
Toni V -- 1/8/2008, 2:11 pm
Re: V-hull or not------WebKitFormBoundarygF0AAApM+
Mike Savage -- 1/8/2008, 6:46 pm
Re: Other: To V Or Not To V
skiffrace -- 1/7/2008, 8:04 am
Re: Other: To V Or Not To V
Dave Reekie -- 1/7/2008, 9:24 am
Re: Other: To V Or Not To V
skiffrace -- 1/7/2008, 9:53 am
Re: Other: To V Or Not To V
Dave Reekie -- 1/7/2008, 10:26 am
Re: Other: To V Or Not To V
Toni V -- 1/8/2008, 2:05 pm
Re: Other: To V Or Not To V
David Reekie -- 1/10/2008, 6:44 am