Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Strip: Carbon Fiber
By:Toni V
Date: 1/29/2008, 11:02 am
In Response To: Re: Strip: Carbon Fiber (Mike Savage)

Hi,

: Foam use as a core can work, but the foam density must be matched to the
: expected usage. Higher density foam at high risk locations, lighter at
: lower risk areas of the hull. Generally, the keel-line is solid FG with...

If you calculate the weight of just foam panels, using different foams in one kayak is not really so practical. I used 60kg/m3 foam and whole kayak's foam weights just over 1 kg, ~2,5 lbs.

I would have chosen foam with higher density but it was not available easily at small batches. I then used different amount of fiberglass for different areas. It seemed to work ok - bottom is very hard and still it's not too heavy.

Messages In This Thread

Strip: Carbon Fiber
Mike Bielski -- 1/26/2008, 12:02 pm
Re: Strip: Carbon Fiber
Bill Hamm -- 1/30/2008, 2:03 am
Composite materials strength comparison *LINK*
Mike Bielski -- 2/4/2008, 8:29 pm
Re: Composite materials strength comparison
Charlie -- 2/6/2008, 12:28 pm
Re: Composite materials strength comparison
Toni V -- 2/7/2008, 2:44 am
Zylon looks impressive!
Brian Nystrom -- 2/6/2008, 6:38 am
Re: Zylon looks impressive!------WebKitFormBoundar
Mike Bielski------WebKitFormBoundaryVSCu9RRcf5g+Of -- 2/6/2008, 8:17 am
Re: Zylon looks impressive!------WebKitFormBoundar
Bill Hamm -- 2/10/2008, 2:56 am
Zylon fabric *LINK*
Dan Caouette (CSFW) -- 2/6/2008, 11:47 am
Re: Composite materials strength comparison
LeeG -- 2/6/2008, 1:34 am
Re: Strip: Carbon Fiber
Mike Bielski -- 1/30/2008, 3:40 pm
Re: Strip: Carbon Fiber
Bill Hamm -- 1/31/2008, 12:55 pm
Re: Strip: Carbon Fiber
Paul G. Jacobson -- 1/31/2008, 3:58 pm
Re: Strip: Carbon Fiber
Bill Hamm -- 2/1/2008, 12:35 am
Re: Strip: Carbon Fiber
Mike Bielski -- 1/31/2008, 1:59 pm
Re: Strip: Carbon Fiber *LINK*
Reg Lake -- 1/31/2008, 3:31 pm
Re: Strip: Carbon Fiber
Paul G. Jacobson -- 1/31/2008, 3:38 pm
Re: Strip: Carbon Fiber
Reg Lake -- 1/31/2008, 4:13 pm
Re: Strip: Carbon Fiber
Bill Hamm -- 2/1/2008, 12:37 am
An essay on tech no log y
Paul G. Jacobson -- 2/1/2008, 2:20 pm
Re: Strip: Carbon Fiber
Paul G. Jacobson -- 1/31/2008, 3:30 pm
Re: Strip: Carbon Fiber
Tom Armstrong -- 1/29/2008, 4:24 pm
Re: Strip: Carbon Fiber *LINK*
Etienne Muller -- 1/29/2008, 11:06 am
Re: Strip: Carbon Fiber
Toni V -- 1/29/2008, 7:40 am
Re: Strip: Carbon Fiber
Mike Savage -- 1/29/2008, 9:36 am
Re: Strip: Carbon Fiber
Toni V -- 1/29/2008, 11:02 am
Carbon vs glass
Sam McFadden -- 1/28/2008, 10:37 pm
Re: Carbon vs glass
Mike Bielski -- 1/28/2008, 11:37 pm
Carbon Fiber or ?
Paul G. Jacobson -- 1/28/2008, 9:36 pm