: Scott, did you install a skeg as is apparently recommended by Vaclav? If not,
: do you see any necessity to do so in the future?
: Glen in Baie-St-Paul.
No skeg needed, I would think. Vaclav's note about same was written before any SLTs were built. (He hasn't built the boat, to my knowledge, and the design was originally offered as "kayaks in plans" on his site. His comments were more in the way of predictions.)
As for our boat, my wife is strictly a fair-weather paddler and likes flat lakes, and the occasional trip with me on SF Bay when it's mild. When I paddled the boat I was able to go straight with no problem. Of course, I'm way too big for it, and if I really dig in I can induce plenty of yaw. The boat responds very well to leaned turns, but tracks nicely when paddled by its intended user. It's very pretty, too.
--S
Messages In This Thread
- Strip: Choosing a design
Emilie Sargent -- 1/30/2008, 2:20 pm- Re: Strip: Choosing a design------WebKitFormBounda
Emilie Sargent------WebKitFormBoundaryMmKhkIiCun+u -- 2/1/2008, 1:17 pm- Re: Strip: Choosing a design *Pic*
Jon T -- 2/1/2008, 8:04 am- Re: Strip: Choosing a design *NM* *Pic*
Jon T -- 2/1/2008, 8:05 am
- Re: Strip: Choosing a design
Acors -- 1/31/2008, 10:51 am- Consider the Storm SLT *LINK* *Pic*
John Caldeira -- 1/30/2008, 5:38 pm- Re: Consider the Storm SLT
Scott Fitzgerrell -- 1/31/2008, 7:20 pm- Re: Consider the Storm SLT
Glen Smith -- 1/31/2008, 7:48 pm- Re: Consider the Storm SLT
Scott Fitzgerrell -- 1/31/2008, 7:57 pm- Thanks for the info Scott *NM*
Glen Smith -- 1/31/2008, 8:13 pm
- Thanks for the info Scott *NM*
- Re: Consider the Storm SLT
- Re: Consider the Storm SLT
- Re: Strip: Choosing a design
William Cruz -- 1/30/2008, 3:05 pm- Re: Strip: Choosing a design
Kudzu -- 1/30/2008, 2:48 pm - Re: Strip: Choosing a design *Pic*
- Re: Strip: Choosing a design------WebKitFormBounda