Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Staple-less stripper construction
By:daren neufeld
Date: 10/16/2001, 10:07 pm
In Response To: Staple-less stripper construction (Chad Smith)

hi Chad;
i use bungie cord with the little metal-and-dowel clips that i dreamed up, and spring clamps to hold the tag end of the bungies back around to the forms. with this method you can adjust tension and the direction it goes in very easily. however, this method can be a bit slow, as you have to wait for the glue to set before you can put your next set of strips on. hollows are dealt with by useing hot glue or a halo frame and pusher clamps.
hope this helps;
daren.....

http://home1.polaroiddigital.com/auction/Oct/200110168647272521580713.jpg

Messages In This Thread

Staple-less stripper construction
Chad Smith -- 10/16/2001, 3:19 pm
Re: Staple-less stripper construction *Pic*
Rick Thomas -- 10/17/2001, 10:51 pm
Re: Staple-less stripper construction
Bobby Curtis -- 10/18/2001, 8:26 am
Re: Staple-less stripper construction
Rick Thomas -- 10/18/2001, 9:02 am
Re: Staple-less
Jim McCool -- 10/17/2001, 11:30 am
Re: Staple-less stripper construction
daren neufeld -- 10/16/2001, 10:07 pm
Re: Staple-less stripper construction
Chad Smith -- 10/17/2001, 7:54 am
David Hazens book
Elliott -- 10/17/2001, 11:56 am
Re: Staple-less a good read
Dave Houser -- 10/16/2001, 7:43 pm
Re: Staple-less stripper construction
Frank Eberdt -- 10/16/2001, 6:01 pm
Re: Staple-less stripper construction
Jason -- 10/16/2001, 4:38 pm
Re: Staple-less stripper construction *Pic*
Chip Sandresky -- 10/16/2001, 4:20 pm
Re: Staple-less stripper construction
Rehd -- 10/16/2001, 4:15 pm
Re: Staple-less stripper construction
Jerry Siegel -- 10/16/2001, 4:04 pm
Re: Staple-less stripper construction
John Schroeder -- 10/16/2001, 3:59 pm
Alternative tape choice
Andreas -- 10/17/2001, 11:33 am