Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Mill Creek 16
By:Ken Sutherland
Date: 10/17/2001, 10:13 pm
In Response To: Re: Mill Creek 16 (Chad Smith)

Thanks Paul and Chad,

I will suggest that he try laminating two 1/8" sheets together to get the 1/4" at the cheapskate price. Might be a little stiffer but it's worth a try.
Thanks again.

Ken

: I would defintly recomend going with the 1/4". If built 2 S&G boats and
: one is a canoe built out of 1/4" luan. If it is going to be covered
: with glass I would recomend using the luan.

: Chad

Messages In This Thread

Mill Creek 16
Ken Sutherland -- 10/17/2001, 1:08 am
Re: Mill Creek 16
Paul G. Jacobson -- 10/17/2001, 3:17 am
Re: Mill Creek 16
Chad Smith -- 10/17/2001, 7:59 am
Re: Mill Creek 16
Ken Sutherland -- 10/17/2001, 10:13 pm
Re: Mill Creek 16
Bill H. -- 10/19/2001, 11:04 pm
Re: Mill Creek 16
Ken Sutherland -- 10/24/2001, 7:32 pm