Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Mill Creek 16
By:Bill H.
Date: 10/19/2001, 11:04 pm
In Response To: Re: Mill Creek 16 (Ken Sutherland)

I'll take the opposite view. I built a Merganser (Eric Shade design) out of 1/8 door skins that were not the greatest quality. In spite of that, after glassing inside and out with 6oz glass it is very stiff and strong. I should note that I used 3" wide 9oz tape on all interior seams, and the 6oz was applied on top of that.

Good luck,

Bill

Messages In This Thread

Mill Creek 16
Ken Sutherland -- 10/17/2001, 1:08 am
Re: Mill Creek 16
Paul G. Jacobson -- 10/17/2001, 3:17 am
Re: Mill Creek 16
Chad Smith -- 10/17/2001, 7:59 am
Re: Mill Creek 16
Ken Sutherland -- 10/17/2001, 10:13 pm
Re: Mill Creek 16
Bill H. -- 10/19/2001, 11:04 pm
Re: Mill Creek 16
Ken Sutherland -- 10/24/2001, 7:32 pm