Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Heyy...aren't you the guy...
By:Shawn Baker
Date: 10/20/2001, 11:48 pm
In Response To: 3 Answers, more or less (Pete Roszyk)

...who once said that there was no need to use the 500 over the 400? :D

: While the pump bodies are the very same size, the larger, 1.5" O.D.,
: inlet and outlet of the 500 gives it a greater pumping capacity than the
: 400 can do with its 1" O.D. fittings. Their website says the 500 will
: do 15 G.P.M., and the 400 will give you 10 G.P.M. The drawback to the 500
: is that the 1.5" hole has over twice the cross-section area as the
: 1", and it looks HUGE on the deck of a kayak. I've heard of that
: being disguised as the base of a compass, but I mount my compasses
: somewhat more forward than that so I can read the numbers without my
: glasses. Instead, I adapt the 1.5" outlet down to fit the 1"
: diameter deck-mounted nipple. I lose some flow, but it's still going to
: have a greater capacity than the 400, and around here the 500's are
: sometimes cheaper than a 400, depending on where you shop.

: That's an ordinary pair of plastic Keepers, with 'faceplates' of 1/8"
: sheet PVC screwed onto them. By making a fold on one side, I got them to
: be stiff enough. A tad bit more comfortable than the smallish originals.

: :Do you have a picture of the bungie system?

: Sorry no; but it's as simple as it sounds. I'll send you a photo after I get
: back from vacation.

: Pete

Messages In This Thread

foot pump questions
LeeG -- 10/20/2001, 11:30 am
Re: foot pump questions
Ray Port Angeles -- 10/21/2001, 1:18 pm
Re: foot pump questions
LeeG -- 10/21/2001, 1:25 pm
Re: ughck!!........ blue-cheese?? O.T.
Rehd -- 10/21/2001, 12:05 am
Re: ughck!!........ blue-cheese?? O.T.
Ross Sieber -- 10/21/2001, 3:54 pm
Re: ughck!!........ blue-cheese?? O.T.
LeeG -- 10/21/2001, 8:18 am
Re: Life IS Good.. :) Blue-Cheese...??? O.T. *NM*
Rehd -- 10/21/2001, 10:46 am
RE: foot pump questions
Val Wann -- 10/20/2001, 12:24 pm
Re: RE: foot pump questions
Pete Roszyk -- 10/20/2001, 1:28 pm
Simple Installation in CLC WR 164 *Pic*
Pete Roszyk -- 10/20/2001, 1:34 pm
Re: Simple Installation in CLC WR 164
john -- 10/21/2001, 1:46 pm
Re: Simple Installation in CLC WR 164
Brian Nystrom -- 10/22/2001, 1:51 pm
Re: ...a couple ideas
Shawn Baker -- 10/22/2001, 10:20 am
pumpin out other yaks w/ yr ftpump
mike allen ---> -- 10/22/2001, 11:55 am
Re: My 3 questions
Shawn Baker -- 10/20/2001, 2:25 pm
Wait! There's More!
Pete Roszyk -- 10/20/2001, 10:50 pm
Questions
Bill Price -- 10/20/2001, 1:52 pm
3 Answers, more or less
Pete Roszyk -- 10/20/2001, 10:39 pm
Re: Heyy...aren't you the guy...
Shawn Baker -- 10/20/2001, 11:48 pm
What? Who, me?
Pete Roszyk -- 11/4/2001, 1:58 pm