Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Aha! *Pic*
By:Pete Rudie
Date: 10/30/2001, 12:24 pm
In Response To: I found the picture. *Pic* (John Monfoe)

The problem is not particularly with the method, but with the material. Your seam tape has a thick selvage edge that is causing the difficulty. If you did it exactly the same way with pieces cut from cloth away from the selvage, that problem would be avoided. A rotary cutter and green plastic cutting mat from a quilt supply store do a fabulous job of cutting strips with clean edges.

Still, Jim has good advice here about what to do with the strips when they are cut.

Messages In This Thread

carbon/kevlar
Blaise Goodpaster -- 10/28/2001, 9:17 pm
Re: carbon/kevlar Coaming TIP
Jim Kozel -- 11/2/2001, 2:52 pm
Re: carbon/kevlar Coaming TIP
Ben Staley -- 11/2/2001, 3:26 pm
Re: carbon/kevlar Coaming TIP
jim kozel -- 11/2/2001, 5:39 pm
Re: Read Spidey's Web
Dave Houser -- 10/29/2001, 3:07 pm
Re: carbon/kevlar
Jim Kozel -- 10/29/2001, 2:10 pm
I know you mean carbon/kevlar cloth *NM*
Jim Kozel -- 10/29/2001, 2:19 pm
Re: carbon/kevlar
LeeG -- 10/29/2001, 12:42 pm
Re: carbon/kevlar
addison -- 10/29/2001, 8:31 am
Re: carbon/kevlar
Blaise Goodpaster -- 10/29/2001, 10:45 am
Re: carbon/kevlar
Bill Sivori -- 10/29/2001, 12:56 am
Re: carbon/kevlar
Blaise Goodpaster -- 10/29/2001, 10:28 am
Re: carbon/kevlar
Bill Sivori -- 10/29/2001, 11:10 am
Like yours, but didn't work. *Pic*
John Monfoe -- 10/29/2001, 5:27 am
Re: Like yours, but didn't work.
Bill Sivori -- 10/29/2001, 9:33 am
Re: Like yours, but didn't work.
John Monfoe -- 10/30/2001, 4:44 am
Re: Like yours, but didn't work.
Bill Sivori -- 10/30/2001, 11:15 pm
Jim, Pete, Bill.
John Monfoe -- 10/31/2001, 4:46 am
Re: Jim, Pete, Bill.
Pete Rudie -- 10/31/2001, 4:33 pm
I found the picture. *Pic*
John Monfoe -- 10/30/2001, 7:04 am
Aha! *Pic*
Pete Rudie -- 10/30/2001, 12:24 pm
Re: I found the picture.
Jim Kozel -- 10/30/2001, 9:56 am
Re: cool deck fittings *Pic*
Dean Trexel -- 10/29/2001, 1:27 am
Re: cool deck fittings
Bill Sivori -- 10/29/2001, 9:01 am
Re: Cape Ann Expedition
Roy Morford -- 10/28/2001, 11:05 pm
Re: Cape Ann Expedition
Blaise Goodpaster -- 10/29/2001, 10:17 am
Re: Cape Ann Expedition
Roy Morford -- 10/29/2001, 1:12 pm
Re: carbon/kevlar *Pic*
Dean Trexel -- 10/28/2001, 11:04 pm
Re: carbon/kevlar
Blaise Goodpaster -- 10/29/2001, 10:11 am