Date: 10/30/2001, 8:56 pm
looks good! nice to see the colour coding, short loops and hear abt the necked CA approach. But does your method just butt the rubber ends together? and then cover over that?
If the necked approach is semi ok, what about stretching one end and cutting the sheath, rolling back say 1 1/2 inches and variably cutting the rubber so the rubber frays out to nothing 1 in away. the tension is now released and pull the sheath over and grabbing just the very end of the sheath pull tight again. Would it neck down to nothing? Saturate the rubber part, not the very end and cut off 1/4 in past the rubber. Melt the nylon to make a needle. Now have a taper abt 1in long ending in a needle point.
cut the bungee same thing on the other side, roll back the sheath and insert the needle in the middle up to 1in. Since bothe sides feather, may be same diameter. Glue in place, even rubber Glue? Wonder if you could prime the needle area? Flex urethane maybe.
Pull the sheath over both and get sheath bonding as well as rubber.
possible, possibly
-mick
Messages In This Thread
- Knotless bungie?
Matthew -- 10/29/2001, 9:31 am- Patiently waiting for Joe Greenley....
Ross Leidy -- 10/30/2001, 10:35 am- Re: Patiently waiting ..... No More! *Pic*
Joe Greenley -- 10/30/2001, 7:12 pm- Re: Thanks Joe! Very cool! *NM*
Ross Leidy -- 10/31/2001, 9:45 am- Thanks Mr. G, when are you going to write a book? *NM*
Matthew -- 11/1/2001, 8:18 pm
- Re: soft padeye?
daren neufeld -- 10/30/2001, 8:59 pm- Re: soft padeye?
addison -- 10/31/2001, 8:23 am
- worth the wait
mike allen ---> -- 10/30/2001, 8:56 pm - Thanks Mr. G, when are you going to write a book? *NM*
- Re: Patiently waiting for Joe Greenley....
Jim Owens -- 10/30/2001, 4:11 pm- Re: Patiently waiting for Joe Greenley....
Ray Port Angeles -- 10/31/2001, 11:30 am- Re: Patiently waiting for Ray Irons...
Shawn Baker -- 10/30/2001, 6:41 pm- That was it! Glad you were paying attention *NM*
Bill Price -- 10/30/2001, 6:45 pm- Re: It comes and goes!! *NM*
Shawn Baker -- 10/30/2001, 7:06 pm
- Re: It comes and goes!! *NM*
- Re: Patiently waiting for Ray Irons...
- i wonder
mike allen ---> -- 10/30/2001, 2:33 pm- Re: i wonder
Bill Price -- 10/30/2001, 6:42 pm- Re: I've tried
Nick Schade - Guillemot Kayaks -- 10/30/2001, 3:19 pm- Re: I've tried
Shawn Baker -- 10/30/2001, 6:54 pm- or this?
mike allen ---> -- 10/30/2001, 4:13 pm - or this?
- Re: I've tried
- Re: Thanks Joe! Very cool! *NM*
- Re: Knotless bungie?
LeeG -- 10/29/2001, 7:57 pm- That's a fisherman's knot.
Brian Nystrom -- 10/30/2001, 12:34 pm- Nope, similar but different it hink
Paul G. Jacobson -- 10/30/2001, 9:15 pm- Re: Nope, similar but different it hink
Brian Nystrom -- 10/31/2001, 12:10 pm
- Re: Nope, similar but different it hink
- Water Knot *Pic*
Nick Schade - Guillemot Kayaks -- 10/30/2001, 8:56 am - Nope, similar but different it hink
- Re: Knotless bungie?
Larry C. -- 10/29/2001, 5:43 pm- Re: Knotless bungie?
Dave E -- 10/29/2001, 1:45 pm- Re: Knotless bungie?
Scott Fitzgerrell -- 10/29/2001, 2:35 pm
- Re: Knotless bungie? *Pic*
Jon Limebrook -- 10/29/2001, 11:45 am- Re: Knotless bungie?
Don Beale -- 10/29/2001, 4:15 pm- Re: Knotless bungie?
Wayne G. -- 10/29/2001, 12:40 pm - Re: Knotless bungie?
- Re: Patiently waiting ..... No More! *Pic*
- Patiently waiting for Joe Greenley....