Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Preventing twist in TJIŽ joist box beam
By:Shawn Baker
Date: 11/28/2001, 7:13 pm
In Response To: Re: Strip: I-shaped TJIŽ joist for a box beam (Nick Schade - Guillemot Kayaks)

: You will stiffen up the box beam even more by installing a couple of cross
: plates between the two beams. This will help eliminate any tendancy to
: twist. A piece of plywood every 4', plus end caps will do a lot.

Good idea. Metal bridging (the stuff actually used when these are used as floor joists) would work too, plus leave room for wiring.

Shawn

Messages In This Thread

Strip: I-shaped TJIŽ joist for a Strong Back *Pic*
Bobby Curtis -- 11/28/2001, 8:51 am
Re: Strip: I-shaped TJIŽ joist for a Strong Back *Pic*
Cal Hutton -- 11/29/2001, 4:05 pm
Re: Strip: I-shaped TJIŽ joist for a Strong Back
Bobby Curtis -- 11/29/2001, 10:13 pm
Re: Strip: I-shaped TJIŽ joist for a Strong Back
Shawn Baker -- 11/29/2001, 5:02 pm
Re: Strip: I-shaped TJIŽ joist for a box beam *Pic*
Shawn Baker -- 11/28/2001, 2:28 pm
Re: Strip: I-shaped TJIŽ joist for a box beam
John Monfoe -- 11/29/2001, 5:42 am
Re: Strip: I-shaped TJIŽ joist for a box beam
Shawn Baker -- 11/29/2001, 1:03 pm
Re: Strip: I-shaped TJIŽ joist for a box beam
John Monfoe -- 11/30/2001, 5:51 am
That's a good rationale for a removable shelf *NM*
Shawn Baker -- 11/30/2001, 3:41 pm
Rehd Strohng Bahcks *Pic*
Bill Price -- 11/29/2001, 4:47 pm
Re: Strip: I-shaped TJIŽ joist for a box beam
Bobby Curtis -- 11/28/2001, 7:31 pm
How heavy? I-shaped TJIŽ joist for a box beam
Shawn Baker -- 11/28/2001, 7:59 pm
Re: Strip: I-shaped TJIŽ joist for a box beam
Nick Schade - Guillemot Kayaks -- 11/28/2001, 5:57 pm
Re: Preventing twist in TJIŽ joist box beam
Shawn Baker -- 11/28/2001, 7:13 pm
Re: Strip: I-shaped TJIŽ joist for a box beam
Severne -- 11/28/2001, 6:54 pm
Re: Cutting holes in TJIŽ joist box beam
Shawn Baker -- 11/28/2001, 7:15 pm
Re: Strip: I-shaped TJIŽ joist for a Strong Back
Malcolm Schweizer -- 11/28/2001, 10:12 am