Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Strip: I-shaped TJIŽ joist for a Strong Back
By:Shawn Baker
Date: 11/29/2001, 5:02 pm

: I thought these would be a great idea so I priced them here in Hawaii. Cost
: of the Trus Joists are $2.72 foot. Two joists 18 ft long would run almost
: $100.

: Has anyone else priced them out?

I can get 12" TJI/250's (a heavier flange than the 1.5" wide 150's) for 1.44. (Still $51.84)

I also work for a General Contractor, and buy them 4000 or 5000 lf at a time. It's impossible to buy them exactly. You always end up with too many, or having to buy more, and there's always a piece or two left over that is just a foot too short and unusable.

Drive by jobsites using TJI's with a $20 bill and a case of beer, and you can probably make a 4:30pm deal. (Depending on the cost of a case of beer in Hawaii, this might not be worth it!!)

Shawn

Messages In This Thread

Strip: I-shaped TJIŽ joist for a Strong Back *Pic*
Bobby Curtis -- 11/28/2001, 8:51 am
Re: Strip: I-shaped TJIŽ joist for a Strong Back *Pic*
Cal Hutton -- 11/29/2001, 4:05 pm
Re: Strip: I-shaped TJIŽ joist for a Strong Back
Bobby Curtis -- 11/29/2001, 10:13 pm
Re: Strip: I-shaped TJIŽ joist for a Strong Back
Shawn Baker -- 11/29/2001, 5:02 pm
Re: Strip: I-shaped TJIŽ joist for a box beam *Pic*
Shawn Baker -- 11/28/2001, 2:28 pm
Re: Strip: I-shaped TJIŽ joist for a box beam
John Monfoe -- 11/29/2001, 5:42 am
Re: Strip: I-shaped TJIŽ joist for a box beam
Shawn Baker -- 11/29/2001, 1:03 pm
Re: Strip: I-shaped TJIŽ joist for a box beam
John Monfoe -- 11/30/2001, 5:51 am
That's a good rationale for a removable shelf *NM*
Shawn Baker -- 11/30/2001, 3:41 pm
Rehd Strohng Bahcks *Pic*
Bill Price -- 11/29/2001, 4:47 pm
Re: Strip: I-shaped TJIŽ joist for a box beam
Bobby Curtis -- 11/28/2001, 7:31 pm
How heavy? I-shaped TJIŽ joist for a box beam
Shawn Baker -- 11/28/2001, 7:59 pm
Re: Strip: I-shaped TJIŽ joist for a box beam
Nick Schade - Guillemot Kayaks -- 11/28/2001, 5:57 pm
Re: Preventing twist in TJIŽ joist box beam
Shawn Baker -- 11/28/2001, 7:13 pm
Re: Strip: I-shaped TJIŽ joist for a box beam
Severne -- 11/28/2001, 6:54 pm
Re: Cutting holes in TJIŽ joist box beam
Shawn Baker -- 11/28/2001, 7:15 pm
Re: Strip: I-shaped TJIŽ joist for a Strong Back
Malcolm Schweizer -- 11/28/2001, 10:12 am