Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Epoxy: HELP; Epoxi stays soft
By:JimPeterson
Date: 12/6/2001, 8:45 pm
In Response To: Epoxy: HELP; Epoxi stays soft (joaquin)

I messed up my first batch, it didn't harden properly, either. I used acetone (definitely outside, with a respirator and gloves) and a thin bladed putty knife to work it off. It takes time, but it came very clean down to bare wood with no scratches. Good luck.

Jim

Messages In This Thread

Epoxy: HELP; Epoxi stays soft
joaquin -- 12/6/2001, 3:40 pm
Re: Epoxy: HELP; Epoxi stays soft
Jay Babina -- 12/7/2001, 10:55 am
Re: Epoxy: HELP; Epoxi stays soft
Tom Johansen -- 12/8/2001, 9:34 am
Re: Epoxy: HELP; Epoxi stays soft
Jay Babina -- 12/10/2001, 10:43 am
Re: Epoxy: HELP; Epoxi stays soft
j.knierim -- 12/10/2001, 6:08 am
Re: Epoxy: HELP; Epoxi stays soft
Tom Johansen -- 12/7/2001, 12:35 am
Re: Epoxy: HELP; Epoxi stays soft
JimPeterson -- 12/6/2001, 8:45 pm
Re: Epoxy: HELP; Epoxi stays soft
Rob Macks -- 12/6/2001, 3:55 pm