Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Material: Hatch gaskets
By:Jim
Date: 12/12/2001, 11:12 pm
In Response To: Re: Material: Hatch gaskets (erez)

I also bought a similar product at home depot, foam weatherstriping. It was even marked "waterproof" so I assumed it was closed cell. The gasket absorbs water easily but it seals well. I used 1 inch by 1/4 inch because it compressed quite a bit. And the adhesive has held up ok. The foam doesn't absorb any water that you'd notice when it's compressed under the covers.
Jim

Messages In This Thread

Material: Hatch gaskets
Ross Leidy -- 12/12/2001, 3:09 pm
Re: Material: Hatch gaskets - update
Ross Leidy -- 12/15/2001, 4:46 pm
Re: Material: Hatch gaskets
Ray Port Angeles -- 12/12/2001, 3:35 pm
Re: Material: Hatch gaskets
erez -- 12/12/2001, 5:25 pm
Re: Material: Hatch gaskets
Jim -- 12/12/2001, 11:12 pm
Re: Material: Hatch gaskets
John Monfoe -- 12/13/2001, 4:33 am